开云体育

My skills will seriously need to be much much better before attempting something like that. But again, for my needs, I may not ever need that much accuracy.? george

I have? morce of haft? inch? the bigger? I have but it is? on a morce? n3 my? late? have? only able to? get morce no1 a little ont maybe? I can made? a no1 but? maybe? also? the

Here is how I quily fix tail stock quill . 1 - 5 morse tapper. Dave

I tried several alternative for an Apron SWarf Shield: I firt tried the Phenom Engineering Shield ( http://www.phenomengineering.com/store/p1/Apron_Chip_Shield_for_Mini_Lathes.html ) : This is held in

I found early on a air gun is not your friend. It will blow chips every where like feed screws, bearing , gears, under bed ways and the list goes on. So air guns was band inside. They had to use a

I watch the video ?. I took him years to do few fixes that finish in December. The testing tail stock quill he did not lock quill for test. It only test in the lock position. The head stock bearing

Have you taken the skirt off and looked ?? george

While I made one of these for my lathe, I was already doing something that avoids the need for it, for way covers, and for leadscrew covers: I clean up after every machining session. I have seen a

Other members may have seen this, but it's new to me. Some top notch work with only the mini-lathe and drill press.? (Reminds me of back when I built the Sparey 5cc) The mini-lathe carriage handwheel

You guys are great!? That all made my morning coffee go by too fast! Dave -- I agree, finding good YT videos is hard, but when you get a good one, it's worth a lot!? Many I'll come back to later,

I found a big difference in YouTube. 20 years ago they where on mark. Today full of wind good luck finding a good one. Dave

Yes.? Good YouTubes.? "Back in the day" we didn't really have those. I ran across this one I liked which is fast paced and he has links in the description to more detailed ones for each mod.? This

I remember reading several years back that a guy I think he was in England & when he unpacked his lathe there was a bag inside with several brand labels that the seller was supposed to put on the

It was a lot of reading. Basically you get pay for. American,? UK and Japanese lathes they have team after it is finish to tweak the lathe and you pay for this. The Chinese and Taiwan lathes are just

This guy is insane with the effort and detail in this series of Pimping the Mini lathe Here <https://www.youtube.com/watch?v=NVBC9Vzixtk&list=PLHRtJd1bD3IQU-A-CPBwys-tTM3wKMOGW> <click it... This Guy

Here's a blurb from Tony's site about import lathe , though it's mostly about the larger ones it's still information . ??? I have? Enco 11x20 according to the part # in a tag on the lathe , but I

Here is is simple tuning tool for tail quill. Under $16.00. Dave

I have one of the old Homier/Speedway models back from somewhere around 2000-2002. I've not found any terrible flaws with it - even back then, there was enough info to sorta know what to expect and

That is one way get new underwear on manager. It is problem today with upper management They think the store management can drive sale and profit. I rarely goto HF today they change from 20 years ago.

There thing I do before run any lathe for no surprise. It like center when do center hole you quickly see it off. Simple fix with morse ream 5 minutes later it is right. Jib adjustment will move as