Hi and welome to the mini-lathe world. I would also like a QCTP, but
like you, I spent the money on other tooling.
Here's a thought.....If memory serves, the HF mini-lathe requires a
5/16 tool. I bought a rather large assortment of HSS and cobalt bits
on ebay. Only 3 or 4 were 5/16, the rest were 3/8 and 1/2 with a
couple of really BIG'UNS ( 3/4). As I use, need or have time, I
sharpen the used bits. I also take the time to grind down the top so
that the tool is the correct height. Voila! quick change! It really
doesn't take that long to loosen and tighten 3 bolts.
For example: among the lot was a cut-off tool ground from a
1/2"x1/2"x3" tool. I just took about3/16 off the top before
sharpening. This makes a very stout cut-off tool.
-btw- the QCTP design I have in mind is on hold until I get a mill!
Matt
one more -btw- I get the added benefit of practicing my grinding
skills.
