--- In 7x12minilathe@y..., "Capt Ken Appleby" <captkenn@m...> wrote:
Hi,
This might sound a bit basic but it has stumped me! While drilling
on
my lathe, I have broken two 2mm drills in two separate holes in a
Is the casting a write-off - Or is there another way?
Someone on the 7X10 minilathe group gave a reference to a site where
it was stated that you can put an aluminum part in simmering water
that is saturated with alum, (of the kind used for making pickles,
(potassium alum?)), and the tap will begin to bubble a bit, when the
bubbling stops, the tap is dissolved.
You might want to ask this same question there and get the referenced
site.
Al
