Sure, you can slot it! You can use a dremel or a thin hacksaw. Of course,
you will need 2 tools to adjust the gibs from now on, unless you slot all
the adjusting screws..
rexarino
toggle quoted message
Show quoted text
On 3/19/07, Herb <hwederma@...> wrote:
I'm in the process of "lapping" in my dove tails etc and have
discovered that one of the gib screw heads are stripped out where the
allen wrench goes into it. The threads are fine, it's just that the
allen wrench just spins in it. Can I "slot" it with a small dremel
wheel so that a slotted screw driver will work on it? Or should I just
order a new one? thanks, Herb W.
Be sure to check out for small mills and
lathes.
Yahoo! Groups Links
--
Do I contradict myself? Very well then I contradict myself, (I am large, I
contain multitudes.)
- Walt Whitman
