Yes, John, you have. But in a good way. It will save me a 2nd order
later. Thanks to others for your input.
I've added:
2644 Clamps for the faceplate
1222 Chuck studs & nuts
1655 Oil fittings
1773 Spare dial springs
2633 Tailstock clamp spring (is this needed on the 8x12?)
2743 Thread gauge
1551 Cutoff tool holder
1929 Cutoff blade (should I order 2?)
1240 Center Finder
1730 Sissor Knurler
I guess I'm holding off on the steady rest & follower rests.
--- In 7x12minilathe@..., "born4something" <ajs@...>
wrote:
Apart from obvious items I now have #2644 clamps for the faceplate,
#1222 chuck studs & nuts, #1655 oil fittings for the leadscrew (my
Sieg doesn't come with those), #1773 spare dial springs, #2633
spring to make the tailstock clamp stay put, some pitch gauges and
a
protractor for setting the compound.
Have I padded your order up yet? <G>
--- In 7x12minilathe@..., "rancerupp" <rupps@> wrote:
. . .
I'm putting together what I want to order for accessories and
other
bits. I'm currently looking at:
(LMS ____) 1 Sync Tooth belt (550m)
(LMS ____) 1 V belt (0-720)
(LMS ____) Steady Rest
(LMS 1198) Follower Rest
(LMS ____) Face Plate
(LMS 2346) 5" 4-jaw chuck
(LMS 2925) Dial Ind. Test Ind., Mag. base
(LMS ____) Knurling Tool
(LMS 1189) Live Center
(LMS 1246) Boring Bar Set
(LMS 1261) Accessory set
(LMS ____) Cut off tool (parting tool)
Do I need extras:
Extra Center Drills (LMS 1230)
Turning Tool Set (LMS 2412)
Any suggestions or missing LMS part #s would be appreciated.
Thanks.
Rance
