No...
With the HF 7x10, the working distance with the chuck mounted is more like 8". They use the older convention of distance between tapered centers mounted at both the headstock and tailstock to get 10".
Also, the headstock spindle bore would not take 1" stock for trying to hold the bolt by its shank with just the head exposed. The bore is just under 13/16", and some users have used a reamer to open it up to a full 13/16".
Paul, Central OR
franksjoy@... wrote:
toggle quoted message
Show quoted text
Retaining the same dimensions you gave, could you do it on a 7X10?
Frankie
