|
You are correct.? However, I will still be able to use my lathe.? The 1 1/2" pipe will need to be bored to fit both the tool port and the vacuum hose end.
On Thursday, October 24, 2024 at 03:41:38 PM PDT, mike allen <animal@...> wrote:
It sounded like he wanted to use his lathe , thats why i piped in with my idea . animal On 10/24/24 3:15 PM, Arthur Coe wrote:
That would work.? I could use
1 1/2" pipe and have almost the full length buried in the 1
1/2" 90 degree fitting.
On Thursday, October 24, 2024 at 01:33:18 PM PDT, Ellis
Cory via groups.io <ellis103@...>
wrote:
Hi Mike. Personally I would take the easy route and use short pieces of plastic pipe bored etc to suit and connect all together. One piece to fit dust collection port, other end to fit 90deg fitting, then the next piece from the fitting, other end to suit the vacuum hose. As short as possible, shouldn¡¯t take up too much extra room. ????????? Ellis ? ?
|
