Tha'ts one sweet lookin unit ! Are there any drawing around for
it somewhere ?
thanks
animal
On 8/9/24 3:27 AM, Pierre-Raymond
Rondelle via groups.io wrote:
toggle quoted message
Show quoted text
Here's my variant:
This grinder, with its large table is going to be extended for
lathe tool processing.
Some holes are to be added to the plate as well as a vise for
gripping the shafts.
Note the table displacement : a rack made with an M14 bolt cut in
the middle and a wheel machined with an M14 tap as a hobbing
cutter.
Currently, I'm building a Quorn variant.
The Gadgetbuilder's design is not easy to adapt for grinding
milling cutters and I was in a hurry to get my drill bits
correctly ground.
On 07.08.24 18:35, Mark Kimball via
groups.io wrote:
[...]
?
Gadgetbuilder's design has been built by quite a few other
folks, including one version that uses mostly 3D printed
parts.? Lots of interesting variations, the main thing is to
achieve the right geometry for the profile(s) you want.? IIRC,
some folks have built adapters for it so they can sharpen end
mills.? Probably just the bottom face, that's the easiest to
sharpen.
Attachments:
