After researching of motors are 221°F [105°C] after that the life is shortened.?
The outside temperature is about? 60°F to 70°F? [15 to 20°C ] less the coil temperature.? So if outside is could be wend the coil is? 221°F [105°C] the outside is between? 151°F and 161°F [85 an 90°C].
On my gauge I set the red mark at 80°C and 105°C.?
If I see gets never red it time to let motor cool down and gives little to finish the cut.?
The Capillary is attached by HVAC Aluminum tape , max temperature is 145 °C at this point the motor is toast?
Dave?
davesmith1800