¿ªÔÆÌåÓý

  1. 7x12MiniLathe
  2. Messages
Single Messages Topics Expanded

Re: Milling attachment for mini lathe

 

Looks like my shop and I use a wheelchair ! Well, I do have a clear area for my lathe and mill but that's about it.

george

On Friday, December 8, 2023 at 01:49:14 PM PST, Bruce J <bruce.desertrat@...> wrote:


I need to either remove or extend the backsplash mounting ( Ted Hanson¡¯s book has a how to on that) in order to get more working area, since the whole thing runs into the backsplash before I run out of cross feed screw. His book also has a nice mobile cabinet/lathe stand design for the 7x10 lathe, which is the one I have.

But that has to wait until I have the time/money to build my work shop so I can move out of the galley-like work area I¡¯ve currently have in our unusable-as-a-garage garage :-/ Yes there¡¯s a lathe in this picture, next to the drill press :-) I really do need to straighten my bench up.




On Dec 8, 2023, at 1:02 PM, davesmith1800 <davesmith1@...> wrote:

You can add plate for more work aera too.
It limit on stork to 2" x 3" . This should do almost everything needed for milling.??

When had Bridgeport with 48" table most was done 5"x5" ir rare I need to take vise for larger work.? Now I am downsizing even my work.

Dave?

--?
Bruce Johnson

"Wherever you go, there you are." B. Banzai, PhD

Attachments:
Join [email protected] to automatically receive all group messages.