开云体育

Vay, Underwriters Laboratories. If I had the option to get a better motor from the start, I would. this one works, but it gets hot after 15 minutes of use. I kinda am worried about it. Mine says it

Wow! $129? Would you still happen to have the ad? Clint D <driggars@...> wrote:Vay they will be the same machine, just different paint, decals HF had theirs on sale for 129.00 and if

Vay they will be the same machine, just different paint, decals HF had theirs on sale for 129.00 and if there is one local to you, just go talk to the manager and tell him you could not make it in

Hi all, I just joined the group. I have question about the Enco 5x6 (Item# BG505-6840) bandsaw. (on sale for $169.99 - free shippping coupon) 1) Does anyone have one? 2) Does it really have

Cletus, What is the "Lennox Diemaster 2"? ...and congrats on the find! Regards, Wayne / AA9DY Grayslake, IL --- "Cletus L. Berkeley" <cberkeley@...> wrote:

Hi All, I'm new to this group, I also belong to the 9x20 Lathe Group. So heres my $0.02 worth: Got my hands on a bargain, Northern Industrial 3-year old and never used 4"x 6" Metal-Cutting Bandsaw at

Thanks for putting up the pics. For other owners of my saw, however, I wonder if it orignally came with a cutoff mechanism for the switch. There is no evidence of this, except for the location of

Hi, Ijust put some pics under aametalmaster in photos. #2 is the switch bracket. #1 is a mod i use to quick cut 45 degree angles, just tap the bed 3/8" and put in a bolt, put on the edge of the 45

Hi, It's been awhile but I seem to remember the saw was setup so when it finished the cut, the saw would hit the switch off. Check the Sears diagram to see if you are missing a part that would do

HI, MINE HAS A LITTLE PIECE OF METAL THAT IS ADJUSTABLE TO HIT THE SWITCH. I HAVE IT SET SO THE SAW JUST FINISHES THE CUT THEN SHUTS OFF. I HAVE A BRAND NEW ROLL OF BLADE STOCK IF ANYONE IS

I'm starting a new thread on this saw, as my original got pretty fragmented. I ordered a starrett 60" blade from MSC and it fits and runs great. Interestingly, I looked carefully for their weld,

ONLINE SAW BLADES www.countrysaw.com BOB

J&L will weld any length of blade. I had to get blades for my version of the 4x6 custom made. It was pricy ($17/blade, mininum $50 order) when I did it (this was about 5 years ago), but I still have

Hi, In reference to your saw, I had researched it earlier. It was built for Sears by Covel I believe. If you compare the bandsaw to the Covel power hacksaw that Sears sold, you will see several

Where is a good online source for bimetal blades, made to size? I have found a few, but maybe somebody has a favorite place. I need 1/2" x 60" blades for my Craftsman 101.2290. Thanks Lynn

I think Don said, or meant to say, that the Nikota stand, which can be seen at that website, is on sale at Kragen Auto Parts. Jeff wrote:

JONNY: WAY TO GO!! WALT

Does anybody know anything about this new benchtop bandsaw? Steve Barmash http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=12586&item=2523524068 &rd=1

Yesterday, I "bought myself a project", as SWMBO says. A Buffalo bandsaw for $20 at the flea market. Cast iron body, 3-speed belt drive, gearing looks good, 3/4 hp single phase Taiwan motor that

I can't find any $15 Niko Workbench at that site. Steve Barmash