开云体育

Has anyone used the bi-metal blade for the 4x6 bandsaw? How did it work out? Packaging says made in USA. Cost is $29.99. I'm currently using a Lennox.WheelerSent via the Samsung Galaxy S7 edge, an

On 4/7/2021 5:29 PM, Larry Hoelscher wrote: > I only use the Bi-metal blades and I get MONTHs from them. While I don't use the bandsaw every week and I only purchased them with the 20% discount

Hi Dave A blade pretty much cuts in the direction the blade body is pointing. If it cuts to one side then the blade body probably is pointing to that side UNLESS the teeth are damaged, the undamaged

I use Lenox blades. They aren't that expensive and cut much better than the HF blade mine came with.

??? ???? I have been buying Bosch blades at LOWE's for @ 10.00 for my saw & they have been working fine . I also got some larger metal cutting ones for my 14 " vertical bandsaw at Lowes for @

I only use the Bi-metal blades and I get MONTHs from them. While I don't use the bandsaw every week and I only purchased them with the 20% discount coupon(NOW GONE). I still have 8 blades ready to

Rule: The tool that does the actual cutting, should be made in USA. That includes drill bits, end mills, saw blades, whatever. I have found that it is well worth the extra money, to get quality

I broke a HF blade with only a few cuts. They gave me a free replacement with no questions. They have cut well enough for my expectations.

So about a month ago, the blade in my saw broke while doing a long cut (2" thick/7" long), probably needed lube!? When I got that blade (HF) it also behaved oddly, but settled and cut really

Thanks for the kind words aRM.? ?I'm still somewhat of a novice on this sort of stuff and my work is a bit rough compared to many. I was inspired by Mark's design and modified it for my

Hello? David Wow !! That's? some? super? work? U? put? in? there. Fantastic,? to? say? the? least? !!! Thanks? for? sharing ATB TC aRM

I just finished my extension table for the front of my saw.? ?I "borrowed" this design from: http://mikesworkshop.weebly.com/bandsaw-cut-off-table-mk-2.html but I made some changes.? ?I decided

Yes, the saw base has sound deadening foam and baffles to muffle the sound. I enjoy your YouTube videos. Thanks.

This isn't my idea but when i saw it I had to make it. I used 3x3 tubing because I had it but 2x2 would have been totally adequate. The upright tub under the table sits on the lower casting so the the

That's fairly extreme! It looks great! Love the vacuum in the base. I'm guessing this also helps muffle the noise of the vacuum.

WOW - beautiful work Steve! I'll have to purchase this edition to see off the the things you have done to your saw.. Dave

Got that issue of HSM.? Nice work. The gray color gives it that "industrial look".WheelerSent via the Samsung Galaxy S7 edge, an AT&T 4G LTE smartphone

Beautiful work, Steve!

I am a long-time member of this forum although I have never posted until now. I thought some might like to see a major modification I made to my saw. I converted it to cut permanently in the vertical

I did a youtube video about fine tuning a 4x6 bandsaw. On my particular saw when you adjusted the blade guides properly it would not cut completely through the stock. The blade cover hit the base and