开云体育

I could agree with that Geno Sent from the woods in Larkspur, Co

John, Your email is much appreciated, and the timing is perfect. With the saw in the vertical position, I was aligning the fence to the blade. That is far easier and potentially less

??? ??? bolts with heads that have 6 sides the same !!! ??? ??? animal

Rick The primary adjustment for horizontal squareness of cut comes from *the joint between the sawframe and the PIVOT ARM* at the left-hand rear of the saw. Do not move the fixed jaw out of parallel

Howard, Funny that you mentioned that. I figured out how to do this in the vertical position but didn't think about the horizontal. On it now. Rick

I would love to have some type of adjustment to square the vertical cut which is my biggest gripe with my saw. I saw how others pretty much re-machined their saw but it should not be that

As others here have said, search Internet for "4x6 bandsaw mods". The "magic" will be to find a way to increase quality of the saw without increasing price, or increasing price just a bit.? Things

The idea of accessories that easily fit on eBay would be great.? The better vertical table, downfeed, jaws for holding small items, lubricant pump, things like that. My biggest problems with my

My #1 and #2 areas #1 Would be Vice Improvements. Extend the vice to almost the blade ?-20 Threaded Holes in the moving Jaw, to add a jack bolt (or metric) #2 Blade adjustment, to get it cutting

It is nice to see a manufacturer take an interest. I would also recommend you check out Mr. Sparber's site where he documents his mods to his band

re: "Any other ideas?" I think a popular option would be a low cost hydraulic downfeed that would bolt up without modifications to saw, or only required simple modifications.? If they wanted to sell

Hi, Volumetrico: Yes,you are right, seldom manufacturer will do so. Come to any group or forums seems meaningless action, IF they want to do some commercial advisement. However, we're here for a

Hi. Welcome to the group. This is a community of users. We probably aren't going to buy direct from the manufacturer in quantity. I'm quite impressed RongFu has reached out to this group of

Agreed. If possible id also like admin to ditch the profiteer selling PPE.

Hi, All: We have a sponsor page at Hobby-Machinist forums, lots of useful information and Topic inside, come visit it at below

??? ??? good I hope someone in jail makes the guy his bitch!!!!!! ??? ??? animal

Well, all I will say is, I used my bandsaw today and it worked great!

I understand the feeling, but logically I think you need to decide if you are a believer of capitalism or socialism. (I know there are other options but those are the big ones in the world today.)?

There was some clown in NYC that is going to jail because he was marking up masked 1800% and selling them to doctors. I’m a believer in the free market, but these kinds of things are different.

Personally, I have very mixed feelings about these laws. Intentionally exploiting others suffering for excess profit is a problem that should be dealt with. But these laws can cause more harm than