开云体育

I emailed the owner of this group with the link to Groups.IO telling him that Yahoo groups have many glitches. Files go missing and photos go missing. I use to have about 35 yahoo groups and many

Crap , they snipped my reply . I said to check out groups.io , at least one of the email lists I read has already gone over there .

-------- Forwarded Message -------- Subject: RE: [4x6bandsaw] Ultimate Vice? Date: 11 Feb 2018 22:42:22 +0000 From: MRFIXIT82852@... [4x6bandsaw] <4x6bandsaw@...> Reply-To:

Yahoo is having many problems. One of them is attachments not showing up on the message board. Yahoo stopped their customer support for these groups. Joe

Nice John! I built some levers for some machines to operate the TPS in the same way. First one I did, I used a slitting saw in the mill to cut the slot. That was slow…..and that degree of precision

Oops the pics didn't come through with the message on the 4x6 Yahoo site (though it was there in the email notification). Don't understand it but I'll repeat and see if it comes through this time.

Bill sent me his photos as I couldn't see them either. His ingenious jigs just reinforces the fact that if you can hold it - you can cut it! I don't believe there is an 'ultimate vice', just a vice

http://mikesworkshop.weebly.com/bandsaw-vice.html http://mikesworkshop.weebly.com/bandsaw-vice.html The vice above by Mike Cox is just fantastic. Larry

Ralph I have used a drillpress clamp to hold both small and large parts to be cut. see picts Doug --------------------------------------------

Thanks everyone, got some good ideas. Ralph

You’re welcome! I forwarded the others as well! Bill Sent: Saturday, January 13, 2018 7:04 AM To: 4x6bandsaw@... Subject: RE: [4x6bandsaw] Ultimate Vice? Got it! Thank you!

Got it! Thank you!

They are just attached to the email. I forwarded an email to your address, rather than the group. Let me know if that works. Sent: Saturday, January 13, 2018 6:48 AM To: 4x6bandsaw@...

Mr. Armstrong, I'm not able to see your pictures. Are these in photobucket or some other 3rd party hosting website that requires a membership? I always like to see what other people are doing with

What a sensible idea! BTW, I keep thinking that "ultimate vice" means something quite different than "ultimate vise." am

Small parts, I just clamp a small drill press vise in the saw vise. Not elegant, but quite functional. Just a few ideas…… [cid:image001.jpg@...] [cid:image002.jpg@...]

Fence wasn’t long enough. Trip to the hardware store for a piece of ?” 1018. Added a bolt to keep it from flexing so much. [cid:image001.jpg@...]

Combination cutting/milling/weld fixture for some nozzles I build often. [cid:image001.jpg@...] [cid:image002.jpg@...] [cid:image003.jpg@...] Sent: Saturday,

Other things, are just temporary. 2” schd 40 pipe I needed to cut in half. [cid:image001.jpg@...] [cid:image002.jpg@...] Sent: Saturday, January 13, 2018 3:31 AM To:

I make fixtures and things as I build things. For cutting angles, I built a fixture to hold the tubing. Be creative! [cid:image001.jpg@...] [cid:image002.jpg@...] Sent: