开云体育

Can't help - haven't had the guts to try it in the vertical position yet @;-) Are you saying this isn't a mounting issue? Graciously, Jim

Today while I was cutting some O1 stock with my saw in the vertical position, it was vibrating a fair amount. After doing some checking (removing blade, removed the v-belt) I find it's the motor.

No problem Dave. I hated to do it, but, apparently the folks who do this just enjoy being a bother to open groups. I may change it back in the future, if it looks like we won't get hit with crap

Oops - Sorry ignore my last post - Doh. I confused restricted with closed. Sorry. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/

Ack - too late. Once you change it to restricted you can NEVER undo it. Going to Moderated would have been the thing to do, or even leaving it unmoderated and moderating posts from new members (this

Wonder if they were annoyed with us, or the 4x6? Leo (cold in pearland, tx)

Due to the recent series of unwanted posts, i've moved membership to the restricted level. This just means I'll have to approve anyone who wants to join. I removed the offending accounts as well.

Don't bother wasting your time on this virus infected web site. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/

Welcome, you're in the right place. If the saw is new or very recently purchased, I'd return it. If you can't, then I'd try to take the upper wheel off and see if something was worn.

This message contains a plea for help! I've uploaded a photo (http://us.f1.yahoofs.com/groups/g_4861259/__hr_BandSaw.jpg? bczWn69Abtm.rT9G) of my Central Machinery S-37151 saw, which I believe fits

no, the original legs are long gone. One day in the shop I stepped sideways to grab something without looking and managed to bend the leg on one end. So that sort of ended the original legs. On

Looks good, but what's wrong with the original stand? Do it see the original's legs still attached in the picture? Graciously, Jim

Hi, I uploaded a picture of the quickie saw stand I built. It's 2x4's, a piece of plywood, some casters, and a sheet of peg board. Look in the "Photos" section on the website. The pegboard

Ryan, Thank you. I need a 2" dia. 23 tooth gear. Do you know if part #23 meets that criteria? I bought the saw used. It is red and made by Northern Tool. The only markings on the saw are: BS

It appears similar to the now-discontinuted one HF had about 4 years ago, except they referred to theirs as a "tabletop" model since it had no legs on the stand. Plus, you'll note there is no spring

Look at the bandsawgears.jpg picture in the photos page and see if you can decipher it, first, then which part it is that you are roughly looking for. I think it's #23, but I could be wrong. If

The poll should have check boxes, not radio buttons. You should be able to pick muiltiple choices by checking an additional choice. I choose 6 & 10-14, for example.

Well, From the looks of it, the motor's repositioning puts less weight at the end of the saw casting. This could help a tiny bit by adding some downward force to the blade as it cuts in the

Dave, I cut the aluminum 3/4" plate with a 10 tooth blade in my sazall. It did not jump like it was with the 24tpi. Thanks, Charlie Still hunting for a 2" 23 tooth gear for my bandsaw.