开云体育

Hi all I've tried the following 1/2" wide belt variations that fit - A section raw edge, AX 'cog' belts and link belts like Fennerflex, even an OEM belt that almost broke apart it was so perished. (I

You can get link belts from Harbor Freight, love em would not know how to even size a v belt. Ralph

I ended up going with a Fenner link belt. Great improvement!

I have ran a Fenner type belt (there are a couple of companies that make these, one red and the other green) on my 4x6 saw, table saw, band saws,Jointer, metal lathe, metal shaper, wood shaper,

I have had good experience with this belt D&D PowerDrive A20/4L220 V Belt, 1/2" x 22" OC, A Section, Rubber https://www.amazon.com/dp/B00EOVL8O8/ref=cm_sw_em_r_mt_dp_G-7pFbJM9FHBQ for my HF

We just got updated customs info and found for our move we can't take any of our machine tools, so the Grizzly mini lathe with full tool set, horizontal band saw, and a couple of table top milling

Thank you Hi Bob, ok i’ll have another go at posting the drawings here! It will be a day or two as im currently working night shift, ill let you kniw how i get on. Cheers Kerrin Links: ------ [1]

Thanks Kerrin. Much appreciated. George Sent: Sunday, August 16, 2020 8:41 PM To: [email protected] Subject: Re: [4x6bandsaw] Added Folder Kerrin’s Quick fit bandsaw table

Hi Karl, Thanks for checking & letting me know! Hope you enjoy making & using the table. Cheers Kerrin

Kerrin, Your long walk was worth it - the files came through just fine. Thanks for the share. (I deleted my "testing" file.) k

Hi Guys, I have added the two files for my table, hopefully you can see them. Any question feel free to ask! Cheers Kerrin

Hi Karl, Thanks for that. It’s a PDF file so that should be ok, I figure it must be the iPad. I’ll try it from my desk top, I was being lazy as it’s sooooo far to walk to the office! Cheers

Kerrin, I just added a "testing" file (.rtf) to your folder with no problems. I wonder if it is an issue with the file type you are adding? I am using ?Mac with Mojave and Safari. k

Hi guys, I just tried to upload the drawings for my table to the files section. I had no problem in creating a folder, BUT adding the files doesn’t seem to won’t to work! I’m using my iPad,

kerrin.galvin added folder Kerrin’s Quick fit bandsaw table

Hi Bob, ok i’ll have another go at posting the drawings here! It will be a day or two as im currently working night shift, ill let you kniw how i get on. Cheers Kerrin

Thanks John I will try what you wrote, Have not had the blade slip off yet in the few test cuts I've done. I did move the bearings back off the blade. I'll keep at it. It's not something I use very

I would too I for one would appreciate you posting the drawings. Bill in OKC William R. Meyers, MSgt, USAF(Ret.) A human being should be able to change a diaper, plan an invasion, butcher a hog,

I for one would appreciate you posting the drawings. Bill in OKC William R. Meyers, MSgt, USAF(Ret.) A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship,

John, the blade should not be hard against the rims. It should ride clear of both rims when properly aligned. The rim is only there to make it easy to put the blade on. You are bending the blade