开云体育

That works too!

On my saw (a Packard), the angle jaw has two mounting positions, and if the right position is used, it will cut 4x7.5" material.? I've never cut anything that big, but I have used the feature to cut

Not quite, I heard the deal is: the first person to make the suggestion gets a free one (for quality control purposes - to make sure the enhancement is properly made).

With all the valuable customer feedback this group is providing, I assume Rong Fu will compensate us with a 50% off the new bandsaw coupon code.

Gasafixer, we needn’t search long to find examples of covid-19 naysayer obituaries. No offense intended but if you have something worthy of contribution regarding band saws, I’m interested.

Sometimes I wonder, if some reverse engineer from photographs, rather than by actually having a machine to disassemble, measure, and clone. I have a thin angle jaw I made for my Grizz saw, to cut

It was other brand, I should have bought RF.? With a 3x6 tube the left guide hit the tube and prevented cutting.? Pictures attached. Many Chinese products suffer from making something that looks

Yes, there are several modifications made by creative individuals for their own saw.? The hydraulic downfeed is one, the vise jaw extension <https://rick.sparber.org/HVJA.pdf> is another example.?

This sort of message is even less desirable than the spam for overpriced masks. This is not a place to tell people not to take precautions. am

Exactly Henry!

Hi, Jerry: How come 4x6 can't cut 3x6? I am not sure if it is happening on other brand, maybe this is their weak point.we have to study the one HF saw inside out factory.

Hi, Joe: You mean like some accessories for upgrade bandsaw? some of upgrade kit set, or modification package?

Stop selling (and buying) into the politicians' and medias' manipulated fear mongering and propaganda. We don't need masks any more now than we did last year, or the year before,... This is a bandsaw

Bill, I don't know whether Rong Fu take special precautions or not. Perhaps RF Sales can tell us what sort of QC they have around this? All I know is that my first and most frustrating saw (a UC115)

Just a question.....does the Rong Fu saw have an alignment problem? I don’t believe the Horror Freight saw is made by Rong Fu. I have a Grizzly saw, which IS a Rong Fu, and it has no problem. Bill

No Howard, just the 4x6, oh and used to be on BuellXB.com when I had a Uly. I think your fix would work with 3 setscrews to centralise the bush, then inject epoxy to fix it in place. But we're

Wow John. Looks like you've spend many hours studying the saw and we benefit your experience. I think the major problem of the saw is the parallel alignment of the pivot shaft to the top of table. I

Hi Rick Try something like this.? Packed out with washers between the casting and the adjuster on the side and the end to get the right adjustment range. Push-pull along the joint, and just push on

Hi Howard Yeah the trick to getting these saws to cut square in both horizontal and vertical directions at the same time is: 1.Do? horizontal squareness 1st, by setting WORK parallel to the pivot

John. Thanks for the information. Very helpful. Howard