Re: Table for Vertical Cuts with HFT Bandsaw
Question for all you fans of the? vertical table for your 4x6:
I made a table as well as used the included table for vertical cuts.
Try as I might I cannot keep the blade from coming off the wheels.
The saw works fine in the horizontal but as soon as I cut in the vertical position - pop - off comes the wheel.
I have tried everything, I think. The blade is where it's supposed to be on the wheels and very tight.
Not sure how it could work ok horizontally but not vertically.
Any suggestions?
|
Re: Table for Vertical Cuts with HFT Bandsaw
Nice table.? I am shocked that someone doesn¡¯t sell these by now!? Maybe they do and I just haven¡¯t seen it yet.? Most can easily make one, but I would rather spend my limited time on making other stuff. ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of edfredfred1@...
Sent: Monday, August 10, 2020 8:42 AM
To: [email protected]
Subject: Re: [4x6bandsaw] Table for Vertical Cuts with HFT Bandsaw ? And my version:
1/4 inch aluminum plate mounted using the factory holes for the crappy stamped table that came with the saw.
|
Re: Table for Vertical Cuts with HFT Bandsaw
And my version:
1/4 inch aluminum plate mounted using the factory holes for the crappy stamped table that came with the saw.
|
Re: Table for Vertical Cuts with HFT Bandsaw
Now, THAT'S A TABLE!?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)
On Sunday, August 9, 2020, 02:02:28 PM CDT, trent kiker <trentkiker@...> wrote:
This is my setup for my Enco 7x12 bandsaw.
On Sat, Aug 8, 2020 at 9:09 AM Dallas < n5fee@...> wrote: I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time.? You can sit on the back as you saw. It folds up for easy storage.
Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
Trent, ? Very nice table ¨C how is it mounted to the saw? ? George ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of trent kiker
Sent: Sunday, August 09, 2020 3:02 PM
To: [email protected]
Subject: Re: [4x6bandsaw] Table for Vertical Cuts with HFT Bandsaw? This is my setup for my Enco 7x12 bandsaw. ? On Sat, Aug 8, 2020 at 9:09 AM Dallas <n5fee@...> wrote: I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time.? You can sit on the back as you saw. It folds up for easy storage.
Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
This is my setup for my Enco 7x12 bandsaw.
On Sat, Aug 8, 2020 at 9:09 AM Dallas < n5fee@...> wrote: I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time.? You can sit on the back as you saw. It folds up for easy storage.
Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
That table is very nice, thanks for posting! I think I will make a smaller version. I like using the vise, easy on/off. Well done..Seb.
|
Re: Table for Vertical Cuts with HFT Bandsaw
Here are some similar mods:???and?.
Mark
|
Re: Table for Vertical Cuts with HFT Bandsaw
Sure! I¡¯ll do it sometime this weekend. Sent from AOL Mobile Mail
Get the new AOL app:
Could you post some sketches of it.
Sent from K5JLR -------- Original message -------- From: Dallas <n5fee@...> Date: 08/08/2020 9:09 AM (GMT-06:00) To: [email protected] Subject: Re: [4x6bandsaw] Table for Vertical Cuts with HFT Bandsaw I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time. ?You can sit on the back as you saw. It folds up for easy storage. Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
Could you post some sketches of it.
Sent from K5JLR
toggle quoted message
Show quoted text
-------- Original message -------- From: Dallas <n5fee@...> Date: 08/08/2020 9:09 AM (GMT-06:00) To: [email protected] Subject: Re: [4x6bandsaw] Table for Vertical Cuts with HFT Bandsaw I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time. ?You can sit on the back as you saw. It folds up for easy storage. Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
I made this table from a magazine article (projects in metal I think) 10-15 years ago and use it all the time. ?You can sit on the back as you saw. It folds up for easy storage.
Dallas
|
Re: Table for Vertical Cuts with HFT Bandsaw
Thanks for the jpeg. It is worth the wait.
Apple has introduced a new image format in iOS 11 called HEIF. Because the Apple app uses a patented image compressor it is not all that common outside the Apple world.
Here it is as a .jpeg ...?
|
Re: Table for Vertical Cuts with HFT Bandsaw
This one is free but limited to number of files per day, Windows
Ron K.
|
Re: Table for Vertical Cuts with HFT Bandsaw
Same here¡.. ? ? I have a simpler method, if Linux won't view it without installing something, I don't look at it.? More things to see than I have time for so I skip videos (or skip to the last 30 seconds) and skip anything that won't display or requires me to sign up or anything.? FB and Twitter are pretty much automatically skipped.
|
Re: Table for Vertical Cuts with HFT Bandsaw
I posted all the time with my iPhone. Just make sure you get jpeg photos.?
|
Re: Table for Vertical Cuts with HFT Bandsaw
Apple has introduced a new image format in iOS 11 called HEIF. Because the Apple app uses a patented image compressor it is not all that common outside the Apple world.
Here it is as a .jpeg ...?
|
Re: Table for Vertical Cuts with HFT Bandsaw
I like that!?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)
On Friday, August 7, 2020, 06:35:09 PM CDT, Ed Ginsberg <ke6bnl@...> wrote:
I made a table attachment that just fits in the vice and I can use it on the small and large bandsaw?
-- Ed?
Agua Dulce,? So.California
1950 F1 street rod
1948 F6 350 chevy/rest stock, no dump bed ? ? ??
1953 chevy 3100 AD for 85 S10 frame going for a 4BT cummins motor, NV4500
1968 Baha Bug with 2.2 ecotec motor, king coil-overs,P/S
2000 National Sea Breeze 5th wheel trailer
1998.5 Dodge 2500? 4x4 Cummins, turbo, trans, injectors, lockers,edge EZ upgrades for towing 35" BFG's, air dog lift pump etc. 5th wheel, air bags
|
Re: Table for Vertical Cuts with HFT Bandsaw
I did have trouble, and first found instructions that didn't work on my machine. Fortunately for me, Other Bill found instructions that did work on mine, because I was already getting grumpy. I have been playing with computers since the late 70's. I think they're great toys, but I still don't think they're ready for prime time. I want computers that just work. Fault tolerant and self-repairing would be just below that on my list of necessaries. Yeah, that's right. I want it all, plus ten percent! ;) When I'm playing with a computer it's ok if it needs me to figure things out and fix them. When I'm doing something with a computer, I need it to work. And mine wasn't.?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)
On Friday, August 7, 2020, 06:18:23 PM CDT, Alan Muller <alan@...> wrote:
I had no trouble.? Windows 10 made me approve the app
it wanted to use, but that was all.? It is a file format Id not run
into before.
am
At 07:46 PM 8/7/2020 +0000, you wrote:
Guys
I?€?m sorry for the problems encountered opening my photo, which I took
with my IPhone. Never thought I?€?d be the source of so much
frustration.? Again, I?€?m sorry.
John Hayden
Sent from AOL Mobile Mail
Get the new AOL app:
On Friday, August 7, 2020, Tom D <perhaps200@...> wrote:
- FWIW...I have a macbook pro...10.15.5...Chrome: Version 84.0.4147.105
(Official Build) (64-bit)...and the pic opened up without any decoder
needed.
- Nice table.
- On Fri, Aug 7, 2020 at 2:01 PM George Taylor, IV
<gtaylor@...> wrote:
- I just spent about 1 hour finding how to view these Apple phone pics
on Windows 10.? Do a google search for ?€?how to view .heic files on
Windows 10?€?.? There are 2 pieces of software required (one is a
codec) and there are videos showing all the steps required.
- ?
- George
|
Re: Table for Vertical Cuts with HFT Bandsaw
I made a table attachment that just fits in the vice and I can use it on the small and large bandsaw?
-- Ed?
Agua Dulce,? So.California
1950 F1 street rod
1948 F6 350 chevy/rest stock, no dump bed ? ? ??
1953 chevy 3100 AD for 85 S10 frame going for a 4BT cummins motor, NV4500
1968 Baha Bug with 2.2 ecotec motor, king coil-overs,P/S
2000 National Sea Breeze 5th wheel trailer
1998.5 Dodge 2500? 4x4 Cummins, turbo, trans, injectors, lockers,edge EZ upgrades for towing 35" BFG's, air dog lift pump etc. 5th wheel, air bags
|
Re: Table for Vertical Cuts with HFT Bandsaw
I had no trouble.? Windows 10 made me approve the app
it wanted to use, but that was all.? It is a file format Id not run
into before.
am
At 07:46 PM 8/7/2020 +0000, you wrote:
toggle quoted message
Show quoted text
Guys
I?€?m sorry for the problems encountered opening my photo, which I took
with my IPhone. Never thought I?€?d be the source of so much
frustration.? Again, I?€?m sorry.
John Hayden
Sent from AOL Mobile Mail
Get the new AOL app:
On Friday, August 7, 2020, Tom D <perhaps200@...> wrote:
- FWIW...I have a macbook pro...10.15.5...Chrome: Version 84.0.4147.105
(Official Build) (64-bit)...and the pic opened up without any decoder
needed.
- Nice table.
- On Fri, Aug 7, 2020 at 2:01 PM George Taylor, IV
<gtaylor@...> wrote:
- I just spent about 1 hour finding how to view these Apple phone pics
on Windows 10.? Do a google search for ?€?how to view .heic files on
Windows 10?€?.? There are 2 pieces of software required (one is a
codec) and there are videos showing all the steps required.
- ?
- George
|
@KarlH
Bill in OKC too
seb fontana
Ed Ginsberg