I emailed the owner of this group with the link to Groups.IO telling him that Yahoo groups have many glitches. Files go missing and photos go missing. I use to have about 35 yahoo groups and many where the files have gone missing and photos gone missing. I created about 18 IO groups to take the place of Yahoo groups. IO Techs copied what info thay could over to the new groups. I offered my help but I did not get a reply from the owner. Hopefully the great info here will not be lost because Yahoo left the group owners high and dry as well as the members. Joe
---In 4x6bandsaw@..., <snagone@...> wrote :
On 2/11/2018 6:47 PM, Terry Coombs
snagone@... [4x6bandsaw] wrote: ?
-------- Forwarded Message --------
?Yahoo is having many problems. One of them is
attachments not showing up on the message board.
Yahoo stopped their customer support for these groups.
Joe ? Crap , they snipped my reply . I said to check out
groups.io , at least one of the email lists I read has already
gone over there .
|
On 2/11/2018 6:47 PM, Terry Coombs
snagone@... [4x6bandsaw] wrote:
?
-------- Forwarded Message --------
?
Yahoo is having many problems. One of them is
attachments not showing up on the message board.
Yahoo stopped their customer support for these groups.
Joe
? Crap , they snipped my reply . I said to check out
groups.io , at least one of the email lists I read has already
gone over there .
|
-------- Forwarded Message --------
?
Yahoo is having many problems. One of them is attachments
not showing up on the message board.
Yahoo stopped their customer support for these groups.
Joe
|
Yahoo is having many problems. One of them is attachments not showing up on the message board.
Yahoo stopped their customer support for these groups.
Joe
|
Re: Ultimate Vice? [1 Attachment]
Nice John!
?
I built some levers for some machines to operate the TPS in the same way. First one I did, I used a slitting saw in the mill to cut the slot. That was slow…..and that degree of
precision is not really necessary.
?
So I made a set up like yours. When I made a few more, I tac-welded the spacers onto one of the pieces of flat-bar. ?
?
Sorry….I can’t seem to find any pics…..it was a while ago.
?
Yes…..I agree…there is no one ultimate vise. There are several, that must be made to suit the task!
?
Bill
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Sunday, January 14, 2018 12:45 AM
To: 4x6bandsaw@...
Subject: RE: [4x6bandsaw] Ultimate Vice? [1 Attachment]
?
?
[Attachment(s) from
vreededesign@... [4x6bandsaw] included below]
Oops the pics didn't come through with the message on the 4x6 Yahoo site?(though it was there in the email notification). Don't understand it but I'll repeat and see if it comes through this time.? Sorry - jv?
|
Oops the pics didn't come through with the message on the 4x6 Yahoo site?(though it was there in the email notification). Don't understand it but I'll repeat and see if it comes through this time.? Sorry - jv?
|
Bill?sent me his photos as I couldn't see them either. His ingenious jigs just reinforces the fact that if you can hold it - you can cut it! I don't believe there is an 'ultimate vice', just a vice set up well for the cut you want to make. Sure every vice needs some extender jaws, and a fixed jaw on the out-feed table helps,?but they don't need to be fancy to work. Here's a pic of a standard vice cutting an 1/8" (3mm) slit to make a slotted clamp, something most people use a milling machine with a slitting saw to do - there are?2 cuts less than?0.040" (1mm) apart. The extender jaws?are just 2"x3/8" black MS bar and extend right across the gap, something that Mike Cox's?beautifully designed and made ones can't do. Horses for courses.? - jv?
|
The vice above by Mike Cox is just fantastic. Larry
|
Ralph
I have used a drillpress clamp to hold both small and large parts to be cut. see picts
Doug
--------------------------------------------
toggle quoted message
Show quoted text
On Sat, 1/13/18, rhulslander@... [4x6bandsaw] <4x6bandsaw@...> wrote:
Subject: RE: [4x6bandsaw] Ultimate Vice?
To: 4x6bandsaw@...
Date: Saturday, January 13, 2018, 11:53 AM
Thanks everyone, got some good ideas.
Ralph
|
Thanks everyone, got some good ideas.
Ralph
|
You’re welcome!
?
I forwarded the others as well!
?
Bill
?
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 7:04 AM
To: 4x6bandsaw@...
Subject: RE: [4x6bandsaw] Ultimate Vice?
?
?
|
|
|
They are just attached to the email.
I forwarded an email to your address, rather than the group. Let me know if that works.
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 6:48 AM
To: 4x6bandsaw@...
Subject: RE: [4x6bandsaw] Ultimate Vice?
?
?
Mr. Armstrong,
I'm not able to see your pictures.? Are these in photobucket or some other 3rd party hosting website that requires a membership?
I always like to see what other people are doing with these saws to improve accuracy and productivity.
|
Mr. Armstrong, I'm not able to see your pictures.? Are these in photobucket or some other 3rd party hosting website that requires a membership? I always like to see what other people are doing with these saws to improve accuracy and productivity. Thanks, J
|
At 02:16 PM 1/13/2018 +0000, you wrote:
?
Small parts, I just clamp a small drill press vise in the saw
vise.
What a sensible idea!
BTW, I keep thinking that "ultimate vice" means something quite
different than "ultimate vise."
am
Not elegant, but
quite functional.
?
Just a few ideas……
?
?
From: 4x6bandsaw@...
[
mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related
to the vise.? The vise itself has not modified because it has never
presented a problem to me.? I also have a bolt shortening jig made
from a piece of thick angle with various sized threaded holes that can be
clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for
parts that won?�?t fit well between the vise
jaws.???????????
?
2.????? 90 Degree stop for quick repeatable
resets after angle cuts:
?
3.????? Parallels with a jack screw:
Posted by: Bill Armstrong
?
Reply to sender ?
Reply to group ?
?
(14)
![[]](https://s.yimg.com/ru/static/images/yg/img/megaphone/1464031581_phpFA8bON)
Have you tried the highest rated email app?
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email
app on the market. What are you waiting for? Now you can access all your
inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an
email again with 1000GB of free cloud storage.
|
Small parts, I just clamp a small drill press vise in the saw vise.
Not elegant, but quite functional.
?
Just a few ideas……
?
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related to the vise.? The vise itself has not modified because it has never presented a problem to me.? I also have
a bolt shortening jig made from a piece of thick angle with various sized threaded holes that can be clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for parts that won’t fit well between the vise jaws.???????????
?
2.????? 90 Degree stop for quick repeatable resets after angle cuts:
?
3.????? Parallels with a jack screw:
|
Fence wasn’t long enough.
Trip to the hardware store for a piece of ?” 1018.
Added a bolt to keep it from flexing so much.
?
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related to the vise.? The vise itself has not modified because it has never presented a problem to me.? I also have
a bolt shortening jig made from a piece of thick angle with various sized threaded holes that can be clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for parts that won’t fit well between the vise jaws.???????????
?
2.????? 90 Degree stop for quick repeatable resets after angle cuts:
?
3.????? Parallels with a jack screw:
|
Combination cutting/milling/weld fixture for some nozzles I build often.
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related to the vise.? The vise itself has not modified because it has never presented a problem to me.? I also have
a bolt shortening jig made from a piece of thick angle with various sized threaded holes that can be clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for parts that won’t fit well between the vise jaws.???????????
?
2.????? 90 Degree stop for quick repeatable resets after angle cuts:
?
3.????? Parallels with a jack screw:
|
Other things, are just temporary.
2” schd 40 pipe I needed to cut in half.
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related to the vise.? The vise itself has not modified because it has never presented a problem to me.? I also have
a bolt shortening jig made from a piece of thick angle with various sized threaded holes that can be clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for parts that won’t fit well between the vise jaws.???????????
?
2.????? 90 Degree stop for quick repeatable resets after angle cuts:
?
3.????? Parallels with a jack screw:
|
I make fixtures and things as I build things.
For cutting angles, I built a fixture to hold the tubing.
Be creative!
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, January 13, 2018 3:31 AM
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Ultimate Vice?
?
?
Here are links to three work-holding and position modifications related to the vise.? The vise itself has not modified because it has never presented a problem to me.? I also have
a bolt shortening jig made from a piece of thick angle with various sized threaded holes that can be clamped between the vise jaws (sorry, no picture right now).?
?
1.????? Fixture plate with threaded holes for parts that won’t fit well between the vise jaws.???????????
?
2.????? 90 Degree stop for quick repeatable resets after angle cuts:
?
3.????? Parallels with a jack screw:
|
mrfixit82852