开云体育

Today while I was cutting some O1 stock with my saw in the vertical position, it was vibrating a fair amount. After doing some checking (removing blade, removed the v-belt) I find it's the motor.

Can't help - haven't had the guts to try it in the vertical position yet @;-) Are you saying this isn't a mounting issue? Graciously, Jim

Well, it could be. However, it occurs to be that something is unbalanced to cause it to vibrate like that. Hence my wonderings. If I were to place a rubber spacer between the motor and the casting

Hello All, Santa gave me a new Enco 4x6 Bandsaw for Christmas. I read all of the past posts so I was aware of all of the tweaks required to improve the saw. I have not checked the the Gearbox for

This looks like an interesting link on the 4x6 as well: http://www.mini-lathe.com/Bandsaw/Bandsaw.htm -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/

I topped my reservoir w/30 wt for no really good reason, but in hindsight I'd probably have been better off draining it and using 80 wt gear oil. I've had no problems to date, but then, it's not

The book calls for 140w which is available in any auto parts store. Pour it slowly or you'll find it runs out and makes a big mess! HTH, Big John <gregrycm@a...> wrote: improve Gearbox head

I just purchased a Grizzly 4X6 and frankly for the money I'm impressed with the quality. Yesterday I looked at a HF 4X6 in their new Scranton PA store, and the quality and features are far below the

I've tried to d/l the bandsaw.pdf file http://groups.yahoo.com/group/4x6bandsaw/files/BandSaw.pdf twice now and it stops d/l at roughly the same point. Is there damage to the file, or is it just

Hi Paul, I think it must be your ISP. I;ve heard of others having this problem, especially with dialup connections. I put a copy of the file on my server. I'll leave it up there for a week

I just downloaded it here without any problem but I'm using cable rather than a dial-up connection. Alan

Charlie Did you ever get this gearbox fixed? George H. on part I is gear gasket/gear

George, No, I was never able to find a 23 tooth Worm Gear. Even after repeated calls to Northern Tool. My urgency was my desire to cut stock and get started with my mill and lathe. About about 3

Dave, This d/l worked just fine, thanks! Paul R wrote: problem, week or

Hi Paul, Sure - no problem. Glad I could help. So maybe it's a Yahoo thing and Yahoo times out after a while? The file will disappear off my server whenever I do my next web site update (which

I'll try and keep a permanent copy at my server: http://www.acmearms.com/BandSaw.pdf Please use as a 2nd source if you can't get it from Yahoo! though, please :) Thanks. wrote: site

It does not look like it is accessible! I get the following: Forbidden You do not have permission to access/Bandsaw.pdf on this server Charlie B writes:

Heh, fixed the permissions, sorry. Should be available now.

There were visible chunks of gunk in my gearbox. As for lube, I use wd 40 on aluminum, helps make the cut look "cleaner" than if not, and may cut a bit faster. On rec.crafts.machining, a couple

Hello, I have Homier 4x6 bandsaw and thoght it would be a good idea to have a way of welding the blade together when it breaks. Here is a website with the method I am copying.