开云体育

I have just purchased a new 4 x 6 saw, and looking at the pictures of Jet, Enco, HF, saws etc it does not look like any of them! Look at the motor mounting. I have included a link to the website

The poll only allows one choice. I use 6tpi on aluminum almost exclusivly as I routinly cut 4 to 6in parts. I use a vari tooth for the small stuff like 1/4 inch steel. maybe a Primary blade, a

Dave, I cut the aluminum 3/4" plate with a 10 tooth blade in my sazall. It did not jump like it was with the 24tpi. Thanks, Charlie Still hunting for a 2" 23 tooth gear for my bandsaw.

Well, From the looks of it, the motor's repositioning puts less weight at the end of the saw casting. This could help a tiny bit by adding some downward force to the blade as it cuts in the

The poll should have check boxes, not radio buttons. You should be able to pick muiltiple choices by checking an additional choice. I choose 6 & 10-14, for example.

Look at the bandsawgears.jpg picture in the photos page and see if you can decipher it, first, then which part it is that you are roughly looking for. I think it's #23, but I could be wrong. If

It appears similar to the now-discontinuted one HF had about 4 years ago, except they referred to theirs as a "tabletop" model since it had no legs on the stand. Plus, you'll note there is no spring

Ryan, Thank you. I need a 2" dia. 23 tooth gear. Do you know if part #23 meets that criteria? I bought the saw used. It is red and made by Northern Tool. The only markings on the saw are: BS

Hi, I uploaded a picture of the quickie saw stand I built. It's 2x4's, a piece of plywood, some casters, and a sheet of peg board. Look in the "Photos" section on the website. The pegboard

Looks good, but what's wrong with the original stand? Do it see the original's legs still attached in the picture? Graciously, Jim

no, the original legs are long gone. One day in the shop I stepped sideways to grab something without looking and managed to bend the leg on one end. So that sort of ended the original legs. On

This message contains a plea for help! I've uploaded a photo (http://us.f1.yahoofs.com/groups/g_4861259/__hr_BandSaw.jpg? bczWn69Abtm.rT9G) of my Central Machinery S-37151 saw, which I believe fits

Welcome, you're in the right place. If the saw is new or very recently purchased, I'd return it. If you can't, then I'd try to take the upper wheel off and see if something was worn.

Don't bother wasting your time on this virus infected web site. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/

Due to the recent series of unwanted posts, i've moved membership to the restricted level. This just means I'll have to approve anyone who wants to join. I removed the offending accounts as well.

Wonder if they were annoyed with us, or the 4x6? Leo (cold in pearland, tx)

Ack - too late. Once you change it to restricted you can NEVER undo it. Going to Moderated would have been the thing to do, or even leaving it unmoderated and moderating posts from new members (this

Oops - Sorry ignore my last post - Doh. I confused restricted with closed. Sorry. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/

No problem Dave. I hated to do it, but, apparently the folks who do this just enjoy being a bother to open groups. I may change it back in the future, if it looks like we won't get hit with crap