Probably wouldn't hurt anything, just takes a little bigger cut and
uses more h.p. to cut. I used .035 on my Ridgid saw for 10 years.Bob
--- In 4x6bandsaw@..., "S_F_Guy" <mliu1@h...> wrote:
The standard blade thickness on the 4x6 bandsaw is 0.025". However,
I
have found a source of 64.5"x0.5" blades with a 0.035" thickness.
Any
pros/cons to consider in using a blade of this thickness? Has
anyone
tried a 0.035" thick blade?
