|
Yes, I've done some experimenting myself although not as intense as you've done and found that the unit is pretty darned good. I did not buy the machine anticipating precision cuts at all but rather as a rough-cut device to save on "elbow-grease". Only to find that precision cuts are the order of the day on these machines ...what a happy bonus!
BTW Happy Father's Day to all!
PS
I know that Im off topic on this so dont bust my chops too much. Posted this on the Mini-mill groups and no feedback, but really need some advise. I am about to purchase a Grizzly G8689 Mini-Mill along with a bunch of accessories including a Rotary Table and Dividing Plates. I am primarily interested in cutting gears within the capacity of the machine for various projects. Where can I find information on this aspect of milling and what cutters should I go out and get?
Cheers, Cletus 9Z4CLB dswr@... wrote: Got a 3' section of 3/4" drill rod yesterday and decided to do an WARNING: This electronic mail (E-mail) document may contain privileged information?intended for?the named recipient(s) only. If you have received this communication in error, please notify the sender immediately and subsequently destroy the document/file. Unlawful copying and/or dissemination of the information/data contained herein may be treated as copyright infringement and prosecuted as such. Do you Yahoo!? - Now only $29.95 per month! |
