On 11/27/2024 3:27 PM, alned03 via groups.io wrote:
Has anyone attempted to file or grind the base to bring it square to the blade over the full range of vertical travel? You can't adjust anything at the pivot point on these machines
What did you mean by "square to the base" ? Did you mean parallel with the long axis of the bed ? Or blade perpendicular to the bed ? If parallel , you can adjust the squareness of the cut by adjusting the fixed jaw of the vise . If the other , the blade angle is adjusted by rotating the bearing blocks . And there is some adjustment where the pivot arm bolts to the head casting .
--
Snag
Si vis pacem , para bellum
