Re: ARE 30 DEGREES AND 60 DEGREES CUTTING ON METAL PIECE IMPORTANT ?
开云体育Depends on what you are doing.I used to make a lot of parts for processing equipment, which required various angles, including 30 & 60 degree. Most common is 45 degree, for miter cuts on square corners, but some things require different angles. Attached is an example: Feeder spouts, cut at a 30 degree angle, made of 304L. I made a cutting fixture just for such angles. Building any exhaust system parts? 30 degree is common for outlet tips. I've built some of those too. Other Bill On 1/3/2024 6:26 PM, Henry wrote:
Hi Guys, |
