Re: What is the best size and purpose for you to use a vertical cutting table?
|
Henry, ? The existing approximately 9¡± x 9¡± is probably OK.? General usage would be to hand-saw small parts out of sheet or plate. ? However, the flexibility in one plane would not be acceptable.? The ideal solution would be to make the table from die-cast aluminum.? However, that would be quite a bit more expensive.? ? But the flexibility of the steel plate version is easily fixed by making the un-bent plate a little longer and bending the front and rear ends down 90 degrees to match the two sides that are already done that way.? This would add four punch operations to remove a small rectangle from each corner and then two brake operations to bend the ends down.? And it would be slightly stiffer if you welded just the tips of the sides and ends together. ? The other improvement would be to make the brace that attaches the rear of the table to the saw frame from steel angle stock instead of bar.? This would be much stiffer. ? Robert Downs ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of Henry
Sent: Thursday, September 17, 2020 22:56
To: [email protected]
Subject: [4x6bandsaw] What is the best size and purpose for you to use a vertical cutting table?? [Edited Message Follows] As the subject says, we are small bandsaw maker from Taiwan and just wondering what will be the best size and purpose for all of you to use the vertical cutting table? Below is the current design for our product RF-128, it is not so perfect for normal users like you guys, some of customer even says it is too soft, just a thin plate looks like funny thing...
Size is about 24x24cm, a black color of thin plate install on the roller guide
Support unit is underneath
A bit curved if slight push it or have any small loading
We would like to know what is your ideal dimension for this table?? and what tasks you often to do with this vertical table? Share with us your comments here!! Appreciate~~
#vertical table
#RF-128 Vertical cutting
#Vertical cutting table
#4x6 vertical cutting
|
