¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. 4x6bandsaw
  2. Messages
Single Messages Topics Expanded Polls

Re: Table for Vertical Cuts with HFT Bandsaw

 

Hi John
Very odd!
Need more info:?
1. Which wheel does it come off? Top or bottom?
2. Do you have to press work hard into the blade or will any pressure do it?
Suspect it's to do with one or other of guide assemblies too far forward - when you push on the blade, it acts as the fulcrum to lever it off the closest wheel.?
Rgds - jv


On Thu, 13 Aug 2020, 4:14 am john walker, <jwalkergh@...> wrote:
Question for all you fans of the? vertical table for your 4x6:

I made a table as well as used the included table for vertical cuts.
Try as I might I cannot keep the blade from coming off the wheels.

The saw works fine in the horizontal but as soon as I cut in the vertical position - pop - off comes the wheel.

I have tried everything, I think. The blade is where it's supposed to be on the wheels and very tight.
Not sure how it could work ok horizontally but not vertically.

Any suggestions?

Join [email protected] to automatically receive all group messages.