Re: How to remove slop from arm pivot
|
Glen, take a look at the attached document.
?
CarlH
toggle quoted message
Show quoted text
From: moto52000@... [4x6bandsaw]
Sent: Thursday, March 14, 2019 10:07 AM
To: 4x6bandsaw@...
Subject: [4x6bandsaw] Re: How to remove slop from arm
pivot
?
?
Thanks JV,? I used a clamp to help push the pivot in all the way before
tightening the setscrew and that seemed to resolve the issue.? Several test
cuts and all seems good now.??
?
I still have to fine tune the blade guide bearing but it's cutting
acceptable for now.? How much pressure on the blade is recommended? I've
seen recommendations anywhere from light as in you should be able to rotate the
bearings by hand to as tight as possible.???
?
Glen
|
