Re: Bainbridge blade guides
|
Charlie,
?
I really don¡¯t see you having any issue with the bearings you installed. Six years shows that to be true!
I don¡¯t see how 350F would alter a bearing metallurgy of a bearing.
I¡¯m just pointing out what the bearing nerds recommend, and that radical high temps are not necessary. Correct bearing fits, aside from plain bearings, are measured in tenths,
(.0001¡±), so it doesn¡¯t take much. ?
?
Bill
?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Thursday, December 20, 2018 4:21 AM
To: 4x6bandsaw@...
Subject: [4x6bandsaw] Re: Bainbridge blade guides
?
?
Hello, Bill,
I am certainly no bearing expert, so I defer to your expertise and experience.
My goal was only to relate what I had done and what worked well for me.? As tapered roller bearings do not have shields, seals or internal lubrication, (at least, the ones I installed didn't), any overheating issues would manifest in a
metallurgical issue.? Fortunately, this has not happened in the six or so years since their installation.
|
