Re: Bainbridge blade guides
|
Darren, ? If you are not going to install grease fittings, after filling with grease, you should at least install brass plugs to keep the swarf from migrating into the open hole. ? ?
toggle quoted message
Show quoted text
From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Sunday, November 25, 2018 16:19
To: 4x6bandsaw@...
Subject: Re: [4x6bandsaw] Re: Bainbridge blade guides?
Good to see it progressing Darren
If Ed says the cam followers are slush filled that just means there's enough grease in them to stop it rusting etc so it still needs extra grease before being put into use.? Agree you don't need to put is a zerk but you will need to fill the internal space inside the cam follower with grease (without blowing the seals!).
Posted by: vreededesign@...
|
