?
In my previous message I forgot to state the Lee Crock was most insistent
that only Carbon-Zinc cells be used, not alkaline / Ni-Cads / or lithium.
?
Furthermore, the way I connected my batteries was different from his (and
his system is more practical when buying battery holders). He connected two
D-cells in series, so that he would have five sets, and then he connected
the five sets together in parallel (making sure that all the positive wires
were connected together, and the same for the negative wires).
?
?
All the necessary items that I list for the home built Crock device will be
priced in Canadian dollars since I'm located in Toronto.
?
The first item needed is the timer. I'm using a pre-built programmable timer
with a SPST relay. At the moment it costs $11.36.
?
DC 6-30V Digital LED Relay Board Timing Circuit Switch Module Micro USB 5V
< ?>
?
?
Regarding the batteries:
?
The last time I built this device was around 2005, and finding battery holders
for two D cells was easy and straightforward. A few days ago I went onto
Amazon to look at them, and discovered that they weren't available for
reasonable prices anymore. One place that still sells them is:
?
5 pieces 2-D battery holder w/ wires - $1.79ea
< ?>
?
For my new Lee Crock device, I've decided to compromise and use a set of
ten AA batteries, because the holders are still easily available and the
resulting device will be smaller and lighter.
?
2 sets of ($8.99 ea X 2 = $17.98):
LAMPVPATH (Pack of 3) 2 AA Battery Holder, 2 AA Battery Holder with Leads,
2 AA Battery Holder with Wires
< ?>
?
This is what Lee Crock had to say about the batteries:
?
" I do know how the body's signal system works that each cell in the
body is a cell in the big battery of the body and make an amount of the
universal electric energy.? The brain signals the cells to function of
daily life and all used electric must be discharged.? You can not store
used electric.? And that used electric field around the body is what
collects the molecules of heavy metal and pulls them into the body and
stores them in the negative energy channels.? That stops up the energy
channels, stopping the circulation from the cell that lost the signals
from the brain.? That is why the body shuts down and gets sick.
?
And if you reverse the flow of universal electric energy it will collect
those molecules of heavy metal that has been stored in the energy
channels and will carry the molecules of heavy metal back out of the
body and store them in their source of electric energy batteries so
those batteries never go dead in the energy cleaner.
?
Universal electric energy pulled and collected the heavy metal into the
body and stored it there. It will pull it out and store it in its supply
source. It is very easy to do by placing an electric conductor pad on
the outside of the body right over the affected cells and connect an
outside source of universal electric energy to it with a 3 (or 15)
minute frequency it will pull the heavy metal molecules back out of the
body and store it in its electric supply negative plates to open up the
energy channels that are plugged. And that does jumpstart the body's
immune system into working and gets the body energy circulation to heal
the body to be clean - healthy - happy - young. You can use the
universal electric energy to pull the heavy metal out. See
http://www.edkuniversity.com/ and learn how or get an energy cleaner to
pull it out. It has 10 -? D size batteries to store the heavy metal in.
The batteries don't go dead in the energy cleaner.? "
?
So his theory is that the carbon in the batteries fill up with the metal
molecules, and given that AA batteries are about one quarter the size of
D cells, it seems like a good idea to replace the AA batteries once a
year - and use the 10 old AA batteries in flashlights, remote controls,
toys etc.
?
?
Also needed are:
?
9 or 12 Volt DC Power adapter , current output greater then 100mA (0.1A)
?
length of stranded wire with an alligator clip
?
10 AA carbon-zinc batteries (bought at a Dollarama store)
?
?
?
In Part 3 I'll talk about setting up and programming the timer board.
?
David
?
