I hide here and read all your posts on Z Scale
?
I also do the same on HO and O Scale for my Ni Scale.
?
Meaning...I don't model to traditional N scale as well.
I model in Ni Scale.
Closure to a scale of 1:152 but?employing elements of 1:130 Scale to 1:220 as well.
?
So here it is....a sort of Thank you and tribute to Z Scale.
?
?
Stop at 3:40 into the video.
?
The BOX
?
I am constructing such a ?Box with over lapping 2+ inch wider hardwood sides for my 42" x 60" Glass Table Top with Molybedum Bolted Rods into it.
?
But I don't lift the glass.
I lower the layout...perhaps in separate thin based modules with plug ins for lighting.
?
?
The Glass stands on it's own four feet.
The box then slides up he legs and it held to the glass by the separate smaller disc and an 8 inch Threaded Rod.
?
The Chrome Tunnel Sleeve will be replaced by cut off high 8 inch tall cedar tree (100') without a Snag on top; made from actual Cedar Bark.
?
Thank You Z Scalers....
You have allowed me to Think Differently.
?
:)) Mark
?
For now I am experimenting with 22 inch radius Levee Modules.
So that I may run long n scale steam.
Mark Cartwright