开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Yccc-So2r
  2. Topics

VLATCH command no longer working

 

Using N1MMLogger+ (latest version)
Could've sworn this was working in NAQP CW last weekend.
Even reverted to previous version of N1MM logger and no dice.

This is what I have in my F key:
F9 V,{OTRSP VLATCHT}

It doesn't "seem" to be passed to the box.? Latch box remains checked (or unchecked)
Manually checking/unchecking works, but that's a pita to do mid stream in a contest, so2r 2bsiq hi hi


This has worked marvelously for years and now suddenly?

Ideas?

Tnx

Mike VE9AA
 

I have used this:

F11 VL, {OTRSP VLATCHT}

for YEARS in So2R...always works 100% but now it doesn't seem to work.? Have mashed that button thousands of times but now no worky-worky.
All other functions of N1MM and SO2R+ box seem to work. Have rebooted and restarted all software a few times.
Even reverted back to Aug 3rd version of N1MM.? Still no go.

Tried WAE contest, then DX logging, and then NAQP from last week. No go.

If I manually open up the SO2R box software and check and/or uncheck the box it (headphone latching) works, course this is tough to do when you're running 2 radios.? Turning on verbose logging, it doesn't 'appear' the command is getting passed.
Is something new blocking?some?OTRSP commands? How would I "see" that myself to confirm?

I have done no windows updates (Win 7), and there's been no changes to any programs on the computer.

Ideas?
 

In the SO2R Box program, if you check Verbose SO2R at the bottom of the window, do the VLATCH commands show in the log window just above the Verbose boxes?

??? Paul, K1XM


On Sat, Aug 14, 2021 at 11:49 AM VE9AA - Mike <ve9aa@...> wrote:
I have used this:

F11 VL, {OTRSP VLATCHT}

for YEARS in So2R...always works 100% but now it doesn't seem to work.? Have mashed that button thousands of times but now no worky-worky.
All other functions of N1MM and SO2R+ box seem to work. Have rebooted and restarted all software a few times.
Even reverted back to Aug 3rd version of N1MM.? Still no go.

Tried WAE contest, then DX logging, and then NAQP from last week. No go.

If I manually open up the SO2R box software and check and/or uncheck the box it (headphone latching) works, course this is tough to do when you're running 2 radios.? Turning on verbose logging, it doesn't 'appear' the command is getting passed.
Is something new blocking?some?OTRSP commands? How would I "see" that myself to confirm?

I have done no windows updates (Win 7), and there's been no changes to any programs on the computer.

Ideas?

 

I am running 2 KB's and if I choose that function key on the other keyboard, I see something verbose the first time the button is pressed but have no way to interpret it.
I think it's just telling me that the other KB has focus.

Nothing about VLATCHT Paul

Tks

On Sat, Aug 14, 2021 at 12:53 PM, Paul Young wrote:
In the SO2R Box program, if you check Verbose SO2R at the bottom of the window, do the VLATCH commands show in the log window just above the Verbose boxes?
?
??? Paul, K1XM
 

I've punched the VLATCH key on both keyboards a couple times and the verbose output is too quick to see how many lines are filling up but here's what I see Paul
 

The TX1 and TX2 commands change which radio will transmit.? The RX1, RX2, and RXS select which radio or radios you will hear in the headphones.

If you are not seeing a VLATCHT command in the log then the logging program isn't sending it.

??? Paul


On Sat, Aug 14, 2021 at 12:06 PM VE9AA - Mike <ve9aa@...> wrote:
I've punched the VLATCH key on both keyboards a couple times and the verbose output is too quick to see how many lines are filling up but here's what I see Paul
 

So, looking at my 2 screenshots below...are THOSE the commands I should be seeing or?


On Sat, Aug 14, 2021 at 01:57 PM, Paul Young wrote:
The TX1 and TX2 commands change which radio will transmit.? The RX1, RX2, and RXS select which radio or radios you will hear in the headphones.
?
If you are not seeing a VLATCHT command in the log then the logging program isn't sending it.
?
??? Paul
 

It depends on what you are doing?? If you are changing which radio will transmit or which radio you will listen to then the logging program will send those commands.? If the logging program sends the VLATCHT command then you should see it too.? It appears that the logging program is not sending VLATCHT.? I don't know why - that might be a question better asked in the N1MM Logger group.

??? Paul, K1XM


On Sat, Aug 14, 2021 at 1:23 PM VE9AA - Mike <ve9aa@...> wrote:
So, looking at my 2 screenshots below...are THOSE the commands I should be seeing or?

On Sat, Aug 14, 2021 at 01:57 PM, Paul Young wrote:
The TX1 and TX2 commands change which radio will transmit.? The RX1, RX2, and RXS select which radio or radios you will hear in the headphones.
?
If you are not seeing a VLATCHT command in the log then the logging program isn't sending it.
?
??? Paul
 

Thank you Paul
 

aha! I figured it out
?
There seems to be either a new setting or one I had never noticed before called
Toggle/Stereo OTRSP Macro and it affects the way latch works.
?
Whew !
?
Thought I was goin nuts there. (well, more so than usual.
?
After WAE I'll have to figure out if I always had that checked or if it was new.? If I always had it checked, I musta UNchecked it.
?
Thanks for the B/W
?
On Sat, Aug 14, 2021 at 12:44 PM, VE9AA - Mike wrote:
I have used this:
F11 VL, {OTRSP VLATCHT}
?
for YEARS in So2R...always works 100% but now it doesn't seem to work.? Have mashed that button thousands of times but now no worky-worky.
All other functions of N1MM and SO2R+ box seem to work. Have rebooted and restarted all software a few times.
Even reverted back to Aug 3rd version of N1MM.? Still no go.
?
Tried WAE contest, then DX logging, and then NAQP from last week. No go.
?
If I manually open up the SO2R box software and check and/or uncheck the box it (headphone latching) works, course this is tough to do when you're running 2 radios.? Turning on verbose logging, it doesn't 'appear' the command is getting passed.
Is something new blocking some OTRSP commands? How would I "see" that myself to confirm?
?
I have done no windows updates (Win 7), and there's been no changes to any programs on the computer.
?
Ideas?
--
-------------
Mike VE9AA
?
?
--
-------------
Mike VE9AA
 

Paul,?

Something you said had me going to look for something like this very thing (I would've never known otherwise that such a thing existed)
Thanks to you again.? Hope you are having fun.? Saw you spotted a couple times.
-Mike
Looks like it's been there a good long while and I've never used it.? Must've hit some keystrokes that I shouldn't have and I own this one.
Whew.? I was really stumped and had no idea why my {OTRSP VALTCHT} command was not being passed to the YCCC SO2R+ box.

Feel silly now, but hey...nobody's perfect, right?.

Had to unplug for lightning just now? Fierce in the skies here.,.

Have fun all and thanks to anyone who may have been looking at it.

At the very least, my blunder will hopefully save someone in the future when they have OTRSP issues.

dit
Version 1.0.7598 (April 2, 2019)
Advanced voice numbering: If a file is missing, display file name (Coded by KU7T)
Fixing exception about collection cannot be changed during iterations (OpenForms) (Coded by KU7T)
CQ-M Contest: Participants from other countries of the World: QSO with another ?P-150-C? continent (except QSOs with Russia) — 2 points (was 3)(RG9A) (Coded by NA3M)
SO2R: Adding Stereo toggle mode. CTRL+~ can be used to enabled/disable any {STEREO} or {OTRSP} macros. Operator can disable stereo switching if only one EntryWindow is being used temporarily. (N2IC, KU7T) (Coded by KU7T)On Sat, Aug 14, 2021 at 03:19 PM, VE9AA

1 - 11 of 11