开云体育

CS-80 + FC7

Fernando Zarone All Messages By This Member #4623 Hi all.? After one year (moved to a new house) I switched my CS-80 on and fortunately everything still works fine, but the FC-7 connected to it. The malfunction is: when I push the pedal forward ?it raises the volume /wha-wha regularly, but when I go back down to the “low “ position, the volume takes some seconds before fading. In other words, when used fot raising the volume it works, when lowering it, it is … delayed. Like a long release…? Any clue? Thanks Fernando ?
slammah2006 All Messages By This Member #4624 开云体育 the original CS80 volume pedal was a lightbulb and photocell with a teardrop? shaped dowser to limit light to the photo cell... I have yet to try my FC7s on my 80 as I once had ground rail burn out with a faulty connector short on the expression jack.... there is voltage there to power a bulb... ---- On Mon, 22 Jan 2018 15:22:18 -0600 Fernando Zarone fernandozarone@... [yamahacs80] wrote ---- toggle quoted message Show quoted text ? Hi all.? After one year (moved to a new house) I switched my CS-80 on and fortunately everything still works fine, but the FC-7 connected to it. The malfunction is: when I push the pedal forward ?it raises the volume /wha-wha regularly, but when I go back down to the “low “ position, the volume takes some seconds before fading. In other words, when used fot raising the volume it works, when lowering it, it is … delayed. Like a long release…? Any clue? Thanks Fernando ?
Fernando Zarone All Messages By This Member #4626 开云体育 I remember this, but, afair, ?it used to work. Perhaps better to eliminate that pedal, in any case… toggle quoted message Show quoted text Il giorno 23 gen 2018, alle ore 06:39, laurie laurie@... [yamahacs80] <yamahacs80@...> ha scritto: the original CS80 volume pedal was a lightbulb and photocell with a teardrop? shaped dowser to limit light to the photo cell... I have yet to try my FC7s on my 80 as I once had ground rail burn out with a faulty connector short on the expression jack.... there is voltage there to power a bulb... ---- On Mon, 22 Jan 2018 15:22:18 -0600?Fernando Zarone?fernandozarone@...?[yamahacs80] <yamahacs80@...>?wrote ----? ? Hi all.? After one year (moved to a new house) I switched my CS-80 on and fortunately everything still works fine, but the FC-7 connected to it. The malfunction is: when I push the pedal forward ?it raises the volume /wha-wha regularly, but when I go back down to the “low “ position, the volume takes some seconds before fading. In other words, when used fot raising the volume it works, when lowering it, it is … delayed. Like a long release…? Any clue? Thanks Fernando ?
slammah2006 All Messages By This Member #4630 开云体育 on further reading, immediately turn off your CS80 and then remove your pedals from the back..... read what the 2 foot jacks say.... the word pedal is not used one jack says foot controller..... that is for the FC7 the other says Foot Switch... that is for a switch pedal.... ---- On Tue, 23 Jan 2018 00:18:23 -0600 Fernando Zarone fernandozarone@... [yamahacs80] wrote ---- toggle quoted message Show quoted text ? I remember this, but, afair, ?it used to work. Perhaps better to eliminate that pedal, in any case… Il giorno 23 gen 2018, alle ore 06:39, laurie laurie@... [yamahacs80] <yamahacs80@...> ha scritto: the original CS80 volume pedal was a lightbulb and photocell with a teardrop? shaped dowser to limit light to the photo cell... I have yet to try my FC7s on my 80 as I once had ground rail burn out with a faulty connector short on the expression jack.... there is voltage there to power a bulb... ---- On Mon, 22 Jan 2018 15:22:18 -0600?Fernando Zarone?fernandozarone@...?[yamahacs80] <yamahacs80@...>?wrote ----? ? Hi all.? After one year (moved to a new house) I switched my CS-80 on and fortunately everything still works fine, but the FC-7 connected to it. The malfunction is: when I push the pedal forward ?it raises the volume /wha-wha regularly, but when I go back down to the “low “ position, the volume takes some seconds before fading. In other words, when used fot raising the volume it works, when lowering it, it is … delayed. Like a long release…? Any clue? Thanks Fernando ?

Previous Topic Next Topic