开云体育

Unfortunate to do this here but I feel the need to put out a public warning against this guy. He charged me around $300 for one of his unison boards and has come up with nothing but a bunch of

Does anyone know if the photo resistors that are in the E-30, E-50, or E-70 etc. might work in a CS-series synth? Any other parts from those that fit the CS? The switch bank on the E-70 looks similar

Hi Scott, Many thanks for the reply. Hmmm, sounds like I have yet another endless quest on my hand here, these CS-80s are certainly no walk in the park to fix and maintain. Will check with Kent Spong

I spoke with a very helpful representative of the company that originally manufactured them. They had the part in their database but could not help with the specifications as the product was just too

Greetings, Hope all is well with everyone. Regarding a previous post on different volume outputs on the L+R of my CS-80, a competent tech locally helped me diagnose a faulty photo resistor on the PRA

Greetings guys, Thanks for the info on the FC7 and the heads up on the FC4. I'm considering buying one of Syntaur's CVP-100 pedal, as they at least list it as functioning with a CS-80. Will shoot

Thanks for the info Scott. Could you possibly share that mod? DId the original pedals have specific model numbers? best, DT

Yes, the FC7 works ok. The bad part is there's a lot of change from full-off pedal to half-pedal, and then not much change from half-pedal to full pedal.It's not the nice, even throw you get with a

Hi, Doesn’t the FC7 / CB 83742 volume pedal work with the Yamaha CS-50/60/80? Please correct me if I am wrong (now I’m curious). I think those are not so difficult to obtain. And FC4 for

Now I'm relieved, at least a little bit. You might want to try and have a go at the pedal of the SY-1 -- it works as a swell pedal with the CS50 so it should work with a CS80 as well.

...and thanks Stephen, I promise no YC organ will loose it's pedal! It's not mine to mess with in any case, just thought if it worked with a CS-80, I could have a tech reverse engineer it of sorts and

Thanks Florian, I'll see if I can have a tech build or mod a pedal for me. Best, Mathias

Since the YC's swell pedal is hardwired to the unit, it can only be used with a CS synth when ripping it from an organ first. Which would be a bloody shame. A while ago, I posted a similar

Hi This is the Circuit-diagram from the YC45 (I hope the embedded image is accepted by groups.io) Florian Am 26.04.21 um 20:25 schrieb Mathias Tjonn:

Hi This is the Circuit-diagram from the YC45 (I hope the embedded image is accepted by groups.io) Florian Am 26.04.21 um 20:25 schrieb Mathias Tjonn:

Greetings, I hope this message finds everyone in the forum well. A friend of mine has the YC-45D organ, and I noticed that the expression pedal is very similar to the one that originally came with

Oh...In my turn I missed this message from you.So yes indeed, using alligator to tie the lead and sense lines together is a quick way to go, but your option of getting a load resistor bank is surely a

Yes you're correct, I actually meant transistors.So will include all that in my Mouser order, thanks a lot!

I usually get the cut strips, but any will do. I believe you mean the transistors, not the resistors in your last sentence? If so, for power transistors in the CS-80 I use: 2SD556 2N3716 2SA746

Great idea! So right, with your p/n references i found the molex plug on Mouser, but the socket terminals gives 3 different results (regular, ‘cut strip’, and also ‘mouser reel’).I dont really