开云体育

Hi, Please note I have a full CS-50 complete EXCEPT for its electronic boards. Let me know what could be interesting for you and how much you would offer. Regards, Phil To:

Hi, I need to replace some key contacts on my CS-80. ?Does anyone have a key contact block from a CS-80/-60/-50 that I could purchase (I assume that the key contacts are the same on those models,

Hi. The headphone amp is on the PRA board. Look on page 57 (pdf page, not actual document page) of the CS series servicing guide (In the files section). If you still have synth normal output then t's

Has anyone had any problem with the headphone jack not working. My CS-50 has never had a working phone jack. You can use the phone jack to input into the EXT jack to create FM synthesis but I can't.

You might be right David.... I've been on and off the Road for decades with her, and only the 2 panel screws as my memory goes.... still have the "keyboard bed" screws in the middle... :) ?

Middle?... hmm.....?! ... you may be right there.... I still have the middle one for my keybed but its been so long since I took a screw out of the middle for the panel....Ive been?on and off the

Laurie, What about the third one in the middle? Have you opened yours so many times you lost that one? David (who needs to open one up this evening)

2 long phillips screws is all it takes to open the panel.... just look at the point where the? front angle turns flat on the bottom of the CS80... one screw?about an inch from?each end... you will

Thanks! I'm gonna head to the hardware store for some canned air and then I'll get on it! ________________________________ To: yamahacs80@... Sent: Monday, September 3, 2012 1:29

How difficult is it to open this synth and access the panel button? I'd be really, really grateful for some help. thanks, ian

Good luck! I scratched the top of my last CS80 while bringing it home when I bought it. It had the cover, but it wouldn't fit in the car with it on :( When I sold it a couple of years later I

Hi, I am looking for someone who has experience with creating the exact same paint color as that on a YC-45D, sparkly metallic flecks and all. I need to repaint a part of my CS-80, but have not had

I am still looking to buy a?CS-80?right cheekblock in original condition. I can now offer $250 for one in very good shape or better. Again, as the right cheekblocks on CS-50, CS-60 and CS-70M

Hi, I have all of those parts. Doug synthparts.com

I have a copy of this, a gift from my late, lamented friend Jurgen Haible. It is a useful book. Crow /**/

I have an entire Yamaha cs50 that has been gutted down to juwt the case, power supply, and the preset boards. I know I sold a few of the corners, but definitely not all of them. I think the ones on

Hi, I am replicating a Yamaha CS-80 lid (one of mine is missing its lid) and am looking for the following parts to complete it: TWO (2) latches from a case lid of a CS-50, CS-60, or CS-80. ALL FOUR

nice of you -thanks-

Wow. Thank you!!

Thank you very much for uploading. It's a great thing to preserve digitally and share such important documents. Daniel Forro