开云体育

Hi Robert. That is not normal, I would suggest you to look for what is wrong. I have 2 FT301D and none of them are doing what you are describing. Best 73 Jo?o Paulo Ribeiro CT2HZF No dia 01/06/2024,

Is the VOX gain turned all the way down?

When I switch from CW mode to USB, The t/r relay momentarily energizes and releases and the relay on the blanking unit energizes and de-energizes. When I switch from AM to CW it seems like the t/r?

Are you still looking for parts? -- Dave Bohlen

If you go as far as to remove the VFO replace the bearings and grease. Chump change and standard bearing. Easy to come by. Just one more thing that it is not. -- Dave Bohlen

I used to sell them and probably still have one as well as the stabilizer. Elcon sells them. They're great. One of the first things I do with a 301 when it comes through is yank out the display and

Oh, Great Fred thank you. I’m used to radio. You say something, the other person says something at least copy or over. But I guess the web is not like radio. My first time on a web site. Then

Hi All your message are posted on the Yaesu site. Fred -- Sent from Thunderbird mail ....

Hey, great thank you. Did the tip on the bumpity bump VFO go through. Had a couple of those. Hi hi Dave -- Dave Bohlen

Yes.. Sent from my iPhone 7

Did this go through? Dave -- Dave Bohlen

Are you talking to me? I’m new to computers and not doing real well. I do enjoy the 301’s and have about 20 of them with lots of parts. Please let me know if this went through. Thank you Dave

Can't help it if you know so much more than the rest of us! ;-) It's been at least 10 years, and I have a '301S that I've slowly been bringing back from the dead.... It now receives fine, but

Can anybody help me respond to questions? Please. Dave -- Dave Bohlen

Does this mean none of this went through? Can some body help me with this software? Please. Dave -- Dave Bohlen

There are very few watt meters (ham) that are accurate today. I calibrate everyone that comes through here. But think how great it makes you feel to double your output by replacing your meter! hi hi

This is a problem with the 301. I do have an instruction sheet on how to set the SSB osc's. You would think they would run 1.5 kc of center but there is a problem in the filter board I think. I set

In Europe they were sold as the Sommer Kamp 301. I probably have a good meter if you can't find one. Dave

The front panel on the 301 is very easy to remove. Take a pick if you don't have a spare but no surprises in there. Just wrench time. Dave

You don't have to remove the VFO to install the stabilizer. I've done lots of them. Directions are in the Elcon library. Easy job with basic ham skills. Dave