开云体育

Friends, I'm selling my vintage Yaesu FT-301D station. I believe I have every piece of the matching line, including the FT-221R 2 meter rig, microphone, headphones, "phone patch." The main pieces

Great idea!? I'm going to add that to mine. Thanks!

?

If you are like me it seems every time one removes the top cover the short speaker lead is forgotten and it tends to break off the rather delicate lugs on the little internal speaker.? Take a

Great idea, now find my old broken ones to harvest center pins. Randy

Thanks all and for the tip of the fasteners from K4EAA.? I ordered a couple and they came quickly.? The socket end breaks and the posts become loose and fall out.? I put in only the socket from the

I used k4Eaa fasteners, perfect except taller.

Check out this link.? See if the see if the size and dimensions work out, they come in black.? Maybe we could set up a group purchase and divide a few up if it looks like they might

K4EAA's site was listing them. His widow is running things for the time being; email them via the Contact info link and see if they can help. I'd also try Earl Andrews (Netty Electronics). 73 -

I( have several Yaesu with broken fastners .? Does anyone have a? source for these?? Jerry

Hi all, As I stated in another thread; I am also a curious soul who wanted to get an FP-301D CW IDer working; although I took the different route of reverse engineering the basic format. Then I found

Good stuff, keep those geezers running. I am off on other projects for a while now. Randy W7CPA

I have no clue how I missed this group/thread other than I may have been too excited to do a thing before needed to know if I had to do a thing. I got one of these with a FT-301D and FV-301D and

Thank you all for your informations, I decided to sell the FT-301D for little money to a ham, who is trying to put new life to the trx :-) 73 from Vienna, good DX ! Othmar OE1SOW

Good job and congratulations Steve.

So this is a bit embarrassing and frustrating. Turns out that brown wire just needed to be connected to 13 volts and now everything works! I strongly suspect that was the problem all along. I can't

Hi Steve, So one end of the brown wire is still connected one end is hanging free.? Where in the circuit is the connected end connected?? Such as junction of R14 and C28 or some other location.?

Well, bad news it seems. I replaced d1301 and Q1301 and have the same problem - of course, this brown wire is still not connected to anything so that might be related, but I'm still not sure where it

There's a sw on the front already for ad hoc IDs. I'm on 3853 LSB it you's like to hear it. Randy

Wanted to chime in with thanks. I intend to do the same for my FP-301D, perhaps with a mod to actuate ID on demand. I am not long winded enough for a ten minute timer! Sent from Yahoo Mail for