开云体育

Connecting YAAC to a Kenwood D74

Keith Kaiser All Messages By This Member #2713 开云体育 I want to use my Kenwood D74 as the source of APRS and as the transmitter to APRS. I have the needed cable to connect my D74 to my M2 MacBook Air, but I’m not sure what the settings on th D74 should be.? Has someone got a nice easy to follow list of what to do, pease send it along.? Keith, WA0?TJT Author:?https://net-control.us ARRL Life Member & VE ARRL ARES?Communicator?Level 2, AEC for?Platte Co. MO KCHEART Radio?Operator - St.?Lukes Barry Road?Hospital
Mark C All Messages By This Member #2714 开云体育 Hi Keith,? You can easily do this by setting the radio’s TNC (KISS12) in the interface menu..? In YACC, you add the device via SERIAL_TNC, mine shows up as??/dev/cu.usbmodem13401 Then I have 9600, transmit enabled, and use the TNC2 command… ? Give that a shot! 73 de K6EF toggle quoted message Show quoted text On Jan 21, 2025, at 5:27?PM, Keith Kaiser via groups.io <wa0tjt@...> wrote: I want to use my Kenwood D74 as the source of APRS and as the transmitter to APRS. I have the needed cable to connect my D74 to my M2 MacBook Air, but I’m not sure what the settings on th D74 should be.? Has someone got a nice easy to follow list of what to do, pease send it along.? Keith, WA0?TJT Author:?https://net-control.us ARRL Life Member & VE ARRL ARES?Communicator?Level 2, AEC for?Platte Co. MO KCHEART Radio?Operator - St.?Lukes Barry Road?Hospital
Keith Kaiser All Messages By This Member #2715 开云体育 Hi Mark, Thanks for this. I can’t find everything however. For example the Interface menu doesn’t have either a TNC or KISS12 so I’m misunderstanding something there. Here is how I set up YAAC, does this look good to you? Thanks again. Keith, WA0?TJT Author:?https://net-control.us ARRL Life Member & VE ARRL ARES?Communicator?Level 2, AEC for?Platte Co. MO KCHEART Radio?Operator - St.?Lukes Barry Road?Hospital toggle quoted message Show quoted text On Jan 21, 2025, at 8:41?PM, Mark C via groups.io <k6ef@...> wrote: Hi Keith,? You can easily do this by setting the radio’s TNC (KISS12) in the interface menu..? In YACC, you add the device via SERIAL_TNC, mine shows up as??/dev/cu.usbmodem13401 Then I have 9600, transmit enabled, and use the TNC2 command… ? Give that a shot! 73 de K6EF On Jan 21, 2025, at 5:27?PM, Keith Kaiser via groups.io <wa0tjt@...> wrote: I want to use my Kenwood D74 as the source of APRS and as the transmitter to APRS. I have the needed cable to connect my D74 to my M2 MacBook Air, but I’m not sure what the settings on th D74 should be.? Has someone got a nice easy to follow list of what to do, pease send it along.? Keith, WA0?TJT Author:?https://net-control.us ARRL Life Member & VE ARRL ARES?Communicator?Level 2, AEC for?Platte Co. MO KCHEART Radio?Operator - St.?Lukes Barry Road?Hospital
km4ack All Messages By This Member #2716 The KISS12 he mentioned is a setting on the radio. Pressing the [F] key followed by 5 on the radio will move it between APRS/KISS/OFF ? Also, verify the KISS output is set correctly (Menu 983) ? 73, de KM4ACK
Keith Kaiser All Messages By This Member #2719 开云体育 Thank you Jason I appreciate the help. I knew it was a simple thing but…. 73 Keith, WA0?TJT Author:?https://net-control.us ARRL Life Member & VE ARRL ARES?Communicator?Level 2, AEC for?Platte Co. MO KCHEART Radio?Operator - St.?Lukes Barry Road?Hospital toggle quoted message Show quoted text On Jan 22, 2025, at 6:32?AM, km4ack via groups.io <jason.oleham@...> wrote: The KISS12 he mentioned is a setting on the radio. Pressing the [F] key followed by 5 on the radio will move it between APRS/KISS/OFF ? Also, verify the KISS output is set correctly (Menu 983) ? 73, de KM4ACK

Previous Topic Next Topic