Do you keep specifying the "-profile mobile" option when you start YAAC again? That tells YAAC which configuration to use for that specific startup of YAAC. If you don't specify it (or specify a different one), then YAAC will attempt to use the other named (or default unnamed) configuration profile. And the profile name is case-sensitive as well, so "Mobile" is not the same as "mobile".
The intent of the profile option was to allow several different YAAC setups on the same computer for separate usages, such as a default terrestrial setup and an ISS setup that would use different options for communicating through the ISS, where YAAC could be repeatedly switched between the different profiles.
One other thing to mention: the named profiles are stored as sub-trees of the default unnamed configuration (which does not look into the named profiles when used). As such, if you clear the default unnamed configuration, you will also destroy all named configuration profiles as well.
Hope this helps.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of Brien - KE7WB <ke7wb@...>
Sent: Sunday, January 7, 2024 4:46 PM
I am using YAAC 1.0 beta on my Raspberry Pi. It has been working fine for the default configuration but I am trying to create a alternate configuration for mobile use.
At the command line I am using "$ java -jar /yaac/YAAC.jar -profile mobile" The problem is that after the first setup, the new configuration is not involkable and keeps opening a non-configured version at susbsequent running of the command line. I am sure I must be overlooking something that is pretty fundamental. Any help would be appreciated.
Brien - KE7WB
Brien - KE7WB