OK, I have an initial draft of a NMEA-0183 over TCP/IP port driver plugin for YAAC that I expect to release with the next build of YAAC. Don't have the SignalK REST support yet, but I could add that in a future version of the plugin should NMEA0183 over TCP not be enough.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of sv Zen Again <vk6hsr@...>
Sent: Sunday, November 6, 2022 5:36 AM
To:
[email protected]Subject: Re: [yaac-users] i want to send weather data(nmea2000) from signalk to YAAC
Hi White Mane,
The NMEA data YAAC wants is on your RPi’s port 10110. That’s if in SignalK you’ve enabled the ‘Convert SignalK to NMEA0183’ plugin and configured the RMC sentence for output.
But YAAC needs to support IP datastream ports in addition to physical serial ports for that to work Perhaps it does, but I haven’t managed to find how to configure one yet.
Cheers,
Mike.
On 6 Nov 2022, at 03:35, WHITE MANE <whitemanenishinomiya@...> wrote:
First of all would like to thank You, about great job you did and do. Awesome.
There is nmea2000 backbone bus in my sailing vessel.
And OpenPlotter on raspberry pi that connects the bus.
I am trying to send APRS weather beacon from YAAC installed in that raspberry pi.
Thank you for your information!
2022年11月5日(土) 7:25 sv Zen Again <vk6hsr@...>:
Gday,
SignalK accepts data from NMEA0183 or NMEA2000 sources via appropriate hardware interfaces (eg Actisense NGT-1 for NMEA2000). It then makes the data available to apps in an ‘internet friendly’ format. Or one can have it output NMEA2000 data as a NMEA0183 IP datastream.
It would be nice if YAAC was able to accept NMEA0183 TCP datastreams on IP ports. I’d certainly use it and I’m sure many other sailors would too. And that doesn’t mean they all need SignalK since most modern onboard networks have a WiFi hotspot which emits a NMEA0183 TCP datastream.
厂别别…
*
*
*
Cheers,
Mike.
On 4 Nov 2022, at 18:06, Andrew P. <andrewemt@...> wrote:
Nope. There is no support for NMEA 2000 bus interfaces in YAAC, and since the NMEA is so tight-lipped as to not make their specification freely public (as opposed to NDA after you pay US$2000 to see it), I don't expect to see direct support for it any time soon.
As for interfacing to a SignalK gateway to an NMEA2000 bus, never heard of it before. Looks interesting (as a source for both GPS and weather data), but I'd have to see how much interest there is in it before spending time coding up a plugin to add a YAAC port for it.
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of WHITE MANE <whitemanenishinomiya@...>
Sent: Friday, November 4, 2022 1:05 PM
To: [email protected]
Subject: [yaac-users] i want to send weather data(nmea2000) from signalk to YAAC
i want to send weather data(nmea2000) from signalk to YAAC
do you have any idea?
sv Zen Again