Station repeats chat message several times after receiving an ack.
|
Hi all,
I think I have a setting wrong in my YAAC configuration, but I can't figure out what it is.? My station repeats chat messages to a station even after it receives multiple acks from the station.? It might be an issue with the other station, I'm not sure.? Here's a screenshot of me (KP3FT) sending a couple lines in chat to a station: |
|
The screenshot didn't come through.
One very important thing: did _YAAC_ see the text message acknowledgements? It doesn't matter if the ack packets were seen on aprs.fi; did the ack packets appear on the Raw Packets display in YAAC? Especially if you were trying to text-message a station through I-gates, this is a problem, because many people only run receive-only I-gates, which will not forward packets back to RF. So the acks never get through, therefore YAAC assumes the original packets didn't get through, and it tries again. Please configure YAAC to log packets in CSV mode and send me the AX25xmit*.csv and AX25rcvd*.csv log files from one of your chat sessions. It could be the remote station is misspelling the ack packets, or it can't handle the base-36 sequence numbers that YAAC uses. Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] <[email protected]> on behalf of KP3FT via groups.io <kp3ft@...> Sent: Saturday, September 5, 2020 5:01 PM To: [email protected] Subject: [yaac-users] Station repeats chat message several times after receiving an ack. Hi all, I think I have a setting wrong in my YAAC configuration, but I can't figure out what it is. My station repeats chat messages to a station even after it receives multiple acks from the station. It might be an issue with the other station, I'm not sure. Here's a screenshot of me (KP3FT) sending a couple lines in chat to a station: [cid:[email protected]] |
Jeff KP3FT