开云体育

Any success in trying to get YAAC to display packets received when interfaced with a Microsat WX3in1 2.0?

The device is in KISS mode, and I have the port type in? YAAC set as a serial TNC , with the correct COM port and baudrate.

Thanks
?Chris

According to the documentation on the Microsat website, the KISS (and APRS-IS simple server) ports are only available over TCP/IP (the Ethernet connection), not via the serial ports reserved for weather stations and GPS receivers.

So you would use the KISS-over-TCP port type to connect to the documented port number (I don't know the exact number, but I'm guessing port 8001 because that's what DireWolf and AGWPE use) at whatever IP address is assigned to the WX3in1 on your LAN. Alternatively, you could use the APRS-IS port type to connect to the "simple server" port just as if you were connecting directly to the APRS-IS backbone.?

Hopefully, the Microsat author would be able to provide more specific information.

Andrew, KA2DDO
author of YAAC

the serial port can be used for a wx station ( PORT 1 ) and for KISS ( PORT 2 )? as it is 2 ports on one connector ..I did have the KISS port working with XASTIR....Im trying to get away from XASTIR..Linux isn't my strong point.

KISS over TCP is not bi- directional and will only RX.

and yes I agree that the information is limited.and needs to be a bit more specific regardiing certain functions of th WX3in1