开云体育

Have you examined the files in YAAC/logdir ?

Typical no-beacon reasons:

1. The beacon record isn't enabled (on the Beacon tab in expert-mode configuration).
2. The RF port (AGWPE, Serial_TNC, etc.) is not configured for transmit-enabled.
3. The RF port is not associated with the named beacon record (for multi-RF-port configurations with different beacons for each port).
4. The PTT isn't correctly configured in your software TNC.
5. The PTT signal path isn't correctly wired to the radio.
6. The PTT polarity isn't set correctly.

________________________________________
From: [email protected] <[email protected]> on behalf of Tim Huffaker <thuffaker@...>
Sent: Tuesday, September 17, 2024 9:29 PM
To: [email protected]
Subject: [yaac-users] No Beacon

I running YAAC after a long while for the yearly bicycle event. I noticed when I select BCN after was able to update YAAC it will not transmit a beacon. I checked the normal suspects but cannot get it work. My packet engine is direwolf running as a Kiss TNC.

What are the common reasons YAAC will not beacon to help find my error.

Tim
KM4ESU