开云体育

I can't put anything above 147.000 in the Monitor Frequency.
Trying to input 147.210 and it jumps from 147.000 to 430.000.

Thanks
Dale
KC2CBD

Can you be a little more specific? In what UI panel are you trying to enter a monitor frequency? In your beacon setting? For a repeater Object? In a filter? Or somewhere else?

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Dale Miller - KC2CBD <stpatrick2@...>
Sent: Sunday, June 30, 2024 9:47 PM
To: [email protected]
Subject: [yaac-users] Monitor Frequency

I can't put anything above 147.000 in the Monitor Frequency.
Trying to input 147.210 and it jumps from 147.000 to 430.000.

Thanks
Dale
KC2CBD

Yes in the Beacon Settings next to "Monitor Frequency"

Thanks
Dale
KC2CBD

Greetings.

I finally got back to the monitor frequency issue you were having, and was unable to replicate it.

However, YAAC is aware of some other countries' band allocations (not all, because not all nations post their amateur radio regulations on the Internet and in a language I can read :-( ). For example, the United Kingdom (Great Britain) stops their 2-meter band at 147.000 (not 148.000 like the US and Canada) and does not have a 1.25-meter band, so YAAC goes directly to their bottom of the 70cm band at 430.000. Per chance, were you using a Raspberry Pi with the Raspbian operating system and didn't properly set your locale to en_US instead of the Raspbian default of en_GB?

Hope this helps.

Andrew, KA2DDO

________________________________________
From: [email protected] <[email protected]> on behalf of Dale Miller - KC2CBD <stpatrick2@...>
Sent: Monday, July 1, 2024 9:53 AM
To: [email protected]
Subject: Re: [yaac-users] Monitor Frequency

Yes in the Beacon Settings next to "Monitor Frequency"

Thanks
Dale
KC2CBD