Greetings.
There could be several reasons why you are not seeing packets received by Direwolf in YAAC.
1. Did you connect YAAC to Direwolf using a YAAC port of type AGWPE or KISS-over-TCP? If so, did you connect to the correct TCP port number as specified in your direwolf.conf file? And is that YAAC port enabled to operate? Those are the only ways presently supported for YAAC to become a client of Direwolf. And YAAC won't cross-understand AGWPE protocol versus KISS protocol if you connect to the wrong protocol's TCP port on Direwolf.
2. Are you looking at the correct geographical area on the YAAC map? Check the coordinates specified on the edge of the map for the graticule lines, and also in the box on the lower-left corner of the map window. Are they anywhere close to where your station is? Note that YAAC supports the entire world (not just North America), so make sure you put your beacon in the correct quadrant of the planet (not East versus West longitude, for example). Did you download OpenStreetMap data to fill in the background? If so, is it showing the correct information for the vicinity of your station?
3. Are you actually receiving traffic into YAAC? Check the View->Raw Packets and View->Station/Object List tables to see if traffic is coming into YAAC (and you're just looking at the wrong coordinates on the map).
If that doesn't help, export your configuration (using the File->Configuration->Export to XML menu choice) and email it to me privately so I can see if there is anything unexpected in your configuration.
Hope this helps.
Andrew, KA2DDO
author of YAAC
________________________________________
From: yaac-users@groups.io <yaac-users@groups.io> on behalf of Dennis Blanchard via groups.io <k1ypp@...>
Sent: Friday, March 1, 2024 6:06 PM
I have Direwolf V1.7, running on a Raspberry Pi 3, FT-817nd, and using YAAC. YAAC 1.0-beta 196(17-Feb-2024). I've configure things for digipeater and Igate, or at least I think I have. I'm new at this.
I see lots of traffic going by in Direwolf. My digipeater beacon shows up on the map on aprs.fi as K1YPP-10.
The problem I have is that none of the traffic is showing up on the YAAC map. It only shows K1YPP-10. If I use XASTIR, the map does populate. However both have a common problem: If I use my FT5-d and beacon to my station, nothing shows up on the map, or in Direwolf. If I go out on my porch and put the handheld on high power, I hit NI4CE-10, which is about 20-30 miles from here and it updates aprs.fi with K1YPP-7. For some reason my K1YPP-10 Igate is ignoring things. I'm keeping things up running if someone wants to see what is on aprs.fi.
The question is, where do I look to fix things? Like I said, I'm new at this. I have gone through the Direwolf and YAAC documents and haven't really found anything that might address this.
Thanks for any pointers and let me know what I might post (config files, logs, etc.)
Dennis, K1YPP
Dennis Blanchard