Keyboard Shortcuts
Likes
Search
Unknown VMEM Test Error
|
hi all,
In going through a full calibration and testing of my new Xpander, I noticed that one test does not pass properly. When doing the VMEM test, it fails with the follow error: "VROM BAD" I checked the service manual and this error is not indicated anywhere. It only states to replace several IC's if you specifically receive the "CA MEM Bad" error message. however this is not the error I'm receiving. In reading the service manual, it appears as though the VMEM is used for buffering parameter data from the control board to the voice board. However, even with this error message, I don't see anything wrong with operational use of the Xpander itself. I've gone through most if not all the parameter settings to make sure control options are properly updating the components on the voice board. So far I have found nothing. So while I'm not certain it's anything to worry about, it would be good to know just in case if this can turn into something worse later on or not. thanks! -omar |
|
Tobbe Bergman
The error message was changed with a software update. I read that?somewhere?once but cant seem to find it now -----------------------------------------------------------------------------------
|
|
I'll have to double check when I get back to the studio next week, but I believe it's OS 1.2 for the processor/control and OS 1.4 for the voice board, and OS 1.0 for the Cassette
toggle quoted message
Show quoted text
On Sun, Feb 12, 2012 at 10:45 AM, Tobbe Bergman <tobbebergman@...> wrote:
|
|
hey all,
toggle quoted message
Show quoted text
just confirmed that I am running firmware 1.2 for the main processor and 1.4 for the voice. any ideas on the error message? On Sun, Feb 12, 2012 at 3:08 PM, Omar <holografique@...> wrote: I'll have to double check when I get back to the studio next week, but I believe it's OS 1.2 for the processor/control and OS 1.4 for the voice board, and OS 1.0 for the Cassette |