开云体育

same here, but if some other people have good luck. any Oberheim employees here that may know about this btw ? Thanks for the info.

well i haven't tried it "yet"-it seems the right mental attitude/commitment is needed and also i've gotten sidetracked with many other equipment pursuits for awhile plus the main thing i want next for

Robert did you try it ? Seems very sketchy. e

the details were sent to me individually sorry i forgot-here they are Just replying to you regarding the cleaning of the front face on the Matrix 12 / Xpander... Nothing overly technical involved i

I do see awesomesauce, but no real detailed instructions on the process : ) http://launch.groups.yahoo.com/group/xpantastic/message/1196

hi-this was done awhile back in this group-please search the word "awesomesauce" and you will get to the posts surrounding the procedure to obtain the gloss look.thanks

thx, Karl,- I already posted and I was correct,- my Xpander is switched ON now so I double checked. Its a matter of Masterpage > MIDI > Channel (selects basic MIDI channel) and the ZONE 1 Input which

:-))) ________________________________ To: xpantastic@... Sent: Mon, March 11, 2013 6:30:59 PM Subject: Re: [xpantastic] I got it now was/Xpander Midi Recieve Channel ? Ok, I got it now

Ok, I got it now Karl, how frustrating all these steps! : ) The key here is the Zone button under Master page that you mention which was set to Omni for all 3 zones. Changing this to the desired

Well, on the far right of the center display.?However I must apologize as I am looking at my Matrix 12 which allows 6 zones instead of three, and does not have external CV inputs. Looking at the

re: far right do you mean on the zone encoder ? Im not seeing Omni ? as a selection (just Zone 1-3, CV1-6, CH 1-16) Can someone please check on this when there in front of there machine. Thanks

Hi, Each zone (in single mode) may be set to it's own midi channel, or to Omni mode. Try this button sequence: At the far right of the zone page is the midi channel, make sure it is not set to omni.

just realized that I have the matrix 12 pdf manual here at work... it looks like you need to set it in the zone itself, or in multiple zones if you have the voices mapped out that way. It looks like

Not being in front of my Xpander too,- but typing from my head: go to [Master] page > [MIDI] > select the MIDI channel Xpander will listen to go to [Zone] > [Input] > set Zone 1 to the same channel

If I remember, I'll look at my matrix later after I get home. I think that it's the same setup. There is probably a separate zone midi channel - I vaguely recall that single mode uses zone 1 by

Xpander Master Midi channel is set to Ch1 (Master, Midi, Channel), Logic is sending out on Ch. 1 (tested all other channels working correctly). Has it to do with midi zones/ (master/midi/zones)

Until recently I had my my Xpander on its own midi buss, but due to some setup thinning out, it now needs to share a midi bus (1 Midi out from a Emagic MT-4) with other synths but I cannot seem to set

Well, my guess would be that either the xpander doesn't have its midi channel set to one (I think that the default may be 'omni', which would produce your symptoms), OR you're channelizing the output

Oh, jee! Looks good. This reminded me that I used to have a Solina String Ensamble, which was dropped during transportation and one of the wooden panels broke. Then, accidentally I sold an other synth

You do wonder if it actually was. But, there is a video on you tube showing David Morley's Xpander with the same finish. http://www.youtube.com/watch?v=OlbMPZ7odHw But I would need more details and