开云体育

yes thats correct, but its just for triggering gate and pitch of each voice. Basically allowing you to trigger or sequence an Xpander without using MIDI. But this has nothing to do with the Xpander's

I'm not 100% sure on how to do it, as I don't have the Xpander in front of me yet. However in the Sound on Sound review of Silent way the reviewer states that they used SW's voice controller to play

Both sides will be fantastic, but difficult to realize ;-) Photos of composants sides will be great. So of you could tale pictures of processor and the voice board with different angles it will be

chris, I can take some for you. I have a US model. I'm assuming you just need pictures of the boards in their current mounted state inside the case. If you need both sides of each board then thats a

Hi to all ! I'm still looking for detailled hi-res pictures of an Xpander electronics boards. So, if someone had to open his box... Thank you Envoyé de mon iPhone

I'm curious how you would make that work. My understanding is the CV inputs on the Xpander are hard-routed to pitch control of the VCO's only. Is this correct? I couldn't see anywhere in the manual or

Is anyone using their Xpander with the Volta or Silent way plugins? If so how do you find it? Are you able to get snappier basses using the plugin's envelopes? My Xpander arrives on thursday and this

Hi, The time for beta testing has come [:-$] I'm looking for 2 beta testers: - 1 Matrix-12 owner with Windows Vista or Windows 7, 64 bits, DAW user (Cubase, FL Studio, Reaper, Studio One, Protools,

I have a few of those chips in stock. Doug synthparts.com

Sorry for being so late.? I had the same issue with my Matrix-12.? In the end, I had to replace one of the CEM chips. In the M-12 they are socketed, so it was not too difficult to troubleshoot by

Hi again, I remember seeing some pictures of the easter eggs many years ago on the internet, this was before the time i tracked my own M12 down.. So having the curious mind i decided to see if i could

Thank you very much. I am curious on how you found out that sequence to get the easter egg? Was this information coming from Oberheim (the company) or just by playing with the buttons? Thanks

Here you go: http://dropmix.xs4all.nl/rick/Emusic/Synth-diy/ -- cheers, matrix http://m.matrixsynth.com

Which SDIY list do you have in mind ? About MatrixSynth, this is a bit too early for the details ;-)

Good idea ;-) The only problem is I do not own an XPander myself. I'm just planning to create a new DIY synth project. The synth for this project will be one of : - Emulator II (but I can't find some

What about making the pics yourself ? Am 07.03.2012 18:26, schrieb c_janot:

Hello, I'm looking for very large pictures of the processor board and the voice board of an XPander. I found a lots of pictures on the web and in this group, but I need very detailled images of

Just as Karl Schmeer mentioned the CX49 is a common capacitor that fails on every voice. It also failed on my 6th voice but after replacing it, it was back to normal. As I mentioned before it's a good

Has your units power board been recaped since 1985 ? (the big capacitors) 2012/3/5 steve_gruskin <steveg@...>

Hi Steve, From what I understand, the Xpander will turn the voice off if it fails tuning.? You can turn it back on in the master page if you need to. Unfortunately I believe you have a hardware