开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Xiegu-X6100
  2. Topics

x6100_r1cbu_v0.20.1_sdcard Image with extended 3rd FAT32 partition to 2GB

 
Edited

Dears,

as I had done it for me I would like to share the R1CBU X6100 FW image with you.
I have applied the patch 20.1. and extended the third partition to 2GB if someone
needed more space as the default configuration of 512MB.

The image is published at filetransfer.io under the corresponding link listed below.


an alternative file storage link
https://gofile.io/d/bZLAml


Unfortunately available only for 21 days as I'm not a registered member.

Hopefully this image is useful for someone who run in problem to install the
20.1 patch.

Image is around 2.7GB and have to be unpacked first form the zip compression.

vy73
Markus
DL8MBY
 

Thanks this is very good of you
Dave 2E0DMB

Virus-free.


On Sat, 23 Mar 2024 at 11:21, <markus@...> wrote:
Dears,

as I had done it for me I would like to share the R1CBU X6100 FW image with you.
I have applied the patch 20.1. and extended the third partition to 2GB if someone
needed more space as the default configuration of 512MB.

The image is published at under the corresponding link listed below.



Unfortunately available only for 21 days as I'm not a registered member.

Hopefully this image is useful for someone who run in problem to install the
20.1 patch.

Image is around 2.7GB and have to be unpacked first form the zip compression.

vy73
Markus
DL8MBY
 

开云体育

Thanks for sharing as I do not yet have a Linux box.

?

?

From: [email protected] <[email protected]> On Behalf Of markus@...
Sent: Saturday, March 23, 2024 6:22 AM
To: [email protected]
Subject: [xiegu-x6100] x6100_r1cbu_v0.20.1_sdcard Image with extended 3rd FAT32 partition to 2GB

?

Dears,

as I had done it for me I would like to share the R1CBU X6100 FW image with you.
I have applied the patch 20.1. and extended the third partition to 2GB if someone
needed more space as the default configuration of 512MB.

The image is published at filetransfer.io under the corresponding link listed below.



Unfortunately available only for 21 days as I'm not a registered member.

Hopefully this image is useful for someone who run in problem to install the
20.1 patch.

Image is around 2.7GB and have to be unpacked first form the zip compression.

vy73
Markus
DL8MBY
[email protected]
 

On Sat, Mar 23, 2024 at 04:21 AM, <markus@...> wrote:
Markus, Thank you very much.? Installed on SD card with no problem. Confirmed QTH (Grid) and Call saved after power Off/On.
????? 73, Carl WA3SEE?
 

 

Dr.Markus,
Thank you for making this version 20.1 available to those of us who are not competent with Linux?

Downloaded, unzipped and copied image to SD card, all without any difficulties.

it is greatly appreciated?

73,
Barry W4LSV
 

I'm glad to read that this effort was appreciated by others
and reduce the amount of work for you to install the FW with
the new patch.

Would be fine if someone who has the possibility could transfer the
FW image file to the file section of this group as the link will expire
in few days in order to host this version for a longer time.

Many thanks in advance for doing this fever.

vy73
Markus
DL8MBY
 

I couldn't download the file without having to pay $9USD for the pleasure.

B-(
 

On Mon, Mar 25, 2024 at 05:11 PM, Chuck Maslin wrote:
I couldn't download the file without having to pay $9USD for the pleasure.
Dear Chuck, not knowing what you write. The link is a file share link of a nonprofit org.

vy73
Markus

PS.:
Btw If someone could upload the FW image content to the file section you should not run
in such troubles again.
 

I used two different browsers and after I created an account, it then
a pop-up informed me that I needed to spend money to download. I
don't think the link was hi-jacked.
I'll look again.

On Mon, Mar 25, 2024 at 9:22?AM <markus@...> wrote:

On Mon, Mar 25, 2024 at 05:11 PM, Chuck Maslin wrote:

I couldn't download the file without having to pay $9USD for the pleasure.

Dear Chuck, not knowing what you write. The link is a file share link of a nonprofit org.

vy73
Markus

PS.:
Btw If someone could upload the FW image content to the file section you should not run
in such troubles again.

image.png

 

I down loaded the file without any problems. I used Firefox on Raspberry OS. Everything worked fine.

Enjoy life, Greg
Live Well, Laugh Often, Love Much!

On 3/25/24 15:30, Chuck Maslin wrote:
I used two different browsers and after I created an account, it then
a pop-up informed me that I needed to spend money to download. I
don't think the link was hi-jacked.
I'll look again.
On Mon, Mar 25, 2024 at 9:22?AM <markus@...> wrote:

On Mon, Mar 25, 2024 at 05:11 PM, Chuck Maslin wrote:

I couldn't download the file without having to pay $9USD for the pleasure.

Dear Chuck, not knowing what you write. The link is a file share link of a nonprofit org.

vy73
Markus

PS.:
Btw If someone could upload the FW image content to the file section you should not run
in such troubles again.
 

That’s weird !!!
I downloaded last night and was OK.
Free of charge.

73
Rob
YS1RS
 

It says on the page, before I even bother creating an account or anything, "Downloads remaining: 0 · Expiration: 4/13/2024, 7:09 AM"


On Mon, Mar 25, 2024 at 5:50?PM Roberto - YS1RS via <ys1rs=[email protected]> wrote:
That’s weird !!!
I downloaded last night and was OK.
Free of charge.

73
Rob
YS1RS



--
John Flinchbaugh
john@...
 

Same here, it asks for a paid account...

Alberto I2KBD
 

It requires me to make an account to download the file. Thank you for the effort. but they want 10 dollars to download it.
 

开云体育

Hi, for those having problems download this version of the firmware I am willing to send you a Dropbox link if that is ok so you can download the file. Please write me off list and I’ll be happy to share it again if that is ok.

?

?

?

From: [email protected] <[email protected]> On Behalf Of Gale Smith
Sent: Tuesday, March 26, 2024 5:42 PM
To: [email protected]
Subject: Re: [xiegu-x6100] x6100_r1cbu_v0.20.1_sdcard Image with extended 3rd FAT32 partition to 2GB

?

It requires me to make an account to download the file. Thank you for the effort. but they want 10 dollars to download it.

 

Yes! $10,00 (Not for me)
TNX for, but no thanks.

Saludos. Diego. EA1CN


--
TNX, Dido. EA1CN
 

I'll share -?
 

Dears,

I have added an alternative file storage link



Hopefully this link will be more reliable.

I'm sorry for any caused inconvenience and additional effort.

vy73
Markus
DL8MBY
 

I managed to download before the first link expired and I installed it today on a 32Gb Micro SD card. I used my Windowws 10 computer and the Win32 Disk Imager 1.0 tool to write the image onto the SD-card.
The X610 boots up fine on the card. Boot up is significantly slower than on the factory firmware, but that is probably as expected.
I haven't done anything more than verified it boots up, but I will dig in more later.

Thanks a lot Markus!

/SM0TGY Tobias

1 - 20 of 25